*mydirectindustry

Catalogs
DEUTZ
L 2011 The genset engine

L 2011 The genset engine

Product catalog summary

Engine Specifications:
The 2011 Gen engines are available in 2, 3, and 4-cylinder naturally aspirated in-line models, with the 4-cylinder model also offering turbocharging. Each cylinder has a displacement of 0.78 liters. The engines feature an integrated oil-cooling system, an acoustically optimized crankcase, and all service points are located on the same side of the engine. An electronic engine governor is available as an option. The design is compact and lightweight, supported by a global service network with over 1,000 locations.

Benefits:

Low noise emissions eliminate the need for additional noise attenuation measures.
Extended service intervals with 1,000-hour oil change intervals and low fuel consumption reduce operating costs.
Low installation costs.
Excellent load takeover characteristics ensure prompt power supply.
Combined oil cooling and lubrication prevent corrosion and cavitation, enhancing reliability and durability while reducing maintenance requirements.

Dimensions and Weights:

F 2L 2011: Length 645 mm, Width 588 mm, Height 707 mm, Weight 212 kg.
F 3L 2011: Length 756 mm, Width 588 mm, Height 701 mm, Weight 254 kg.
F 4L 2011: Length 868 mm, Width 588 mm, Height 722 mm, Weight 293 kg.
BF 4L 2011: Length 778 mm, Width 531 mm, Height 704 mm, Weight 295 kg.

Performance Ratings (50 Hz):
At 1500 rpm, the engines offer continuous power (COP), prime power (PRP), and limited-time running power (LTP) with varying outputs for each model. Fuel consumption varies with load, with specific values provided for 100%, 75%, 50%, and 25% loads.

Performance Ratings (60 Hz):
At 1800 rpm, similar ratings are provided with slightly higher power outputs and adjusted fuel consumption figures.

Standard Specifications:
The engines come with a flywheel housing SAE 4, integrated cooling system, dry air cleaner, fuel filter, alternator, and starter motor. A mechanical governor by Bosch is standard.

Additional Information:
Power reduction may occur depending on altitude and temperature. For detailed specifications and fuel requirements, refer to the operation manual. The information provided is for reference and not binding.

Catalog excerpts

12-50 kVA at 1500/1800 min-1 | rpm The engine with integrated oil cooling system. These are the characteristics of the 2011 Gen: 2, 3 and 4 cylinder naturally aspirated in-line engines. 4 cylinder model also with turbocharging. Displacement: 0.78 l/cylinder. Integrated oil-cooling (engine is delivered complete with cooler). Acoustically optimized crankcase. All service points on the same engine side. Electronic engine governor (option). Compact design and low weight. Worldwide service network with over 1,000 locations. Your benefits: u Low noise emission, cost savings as no noise attenuation measures are required. u Long service intervals: 1,000-hour oil change intervals and low fuel consumption bring savings in operating costs. u Low installation costs. u Excellent load takeover characteristics ensure prompt power supply. u Combined oil cooling and lubrication prevents corrosion and cavitation. High reliability and durability together with reduced maintenance requirement and wear parts. 2011. The Genset Engine. Dimensions and weights/integrated cooler F 2L 2011 Length: mm| inch 645 | 25.2 Width: mm| inch 588 | 22.9 Height: mm| inch 707 | 27.6 Weight: kg | lb 212 | 467 F 3L 2011 Length: mm| inch 756 | 29.5 Width: mm| inch 588 | 22.9 Height : mm| inch 701 | 27.3 Weight kg | lb 254 | 560 F 4L 2011 Length: mm| inch 868 | 33.9 Width: mm| inch 588 | 22.9 Height : mm| inch 722 | 28.2 Weight kg | lb 293 | 646 BF4L 2011 Length: mm| inch 778 | 30.3 Width: mm| inch 531 | 20.7 Height : mm| inch 704 | 27.5 Weight kg | lb 295 | 650

Open the catalog to page 1

u Rating table: 2011.The Genset Engine. 50 Hz Engine type F2L 2011 F3L 2011 F4L 2011 BF4L 2011 Speed min-1 | rpm 1500 1500 1500 1500 Frequency Hz 50 50 50 50 Engine/genset ratings 1) Continuous power, ICN (COP)2) kW | hp 11,4 | 15.5 18,1 | 24.6 26,2 | 35.6 34,6 | 47.1 Prime power, ICN (PRP)3) kW | hp 12,0 | 16.3 19,0 | 25.8 27,6 | 37.5 36,4 | 49.5 Limited-time running power, IFN (LTP)4) kW | hp 12,6 | 17.1 20,0 | 27.2 29,0 | 39.4 38,2 | 52.0 Typical generator power output Typical generator power output (COP)5) kVA 11,8 19,0 28,5 38,0 Typical generator power output (PRP)5) kVA 12,5 20,0 30,0 40,0...

Open the catalog to page 2

L 2011 The genset engine

L 2011 The genset engine

Catalog excerpts

All DEUTZ catalogs and technical brochures