Catalogs >
DEUTZ >
DEUTZ TCD 12.0/16.0

DEUTZ TCD 12.0/16.0
2Pages

Catalog excerpts

■ Water-cooled, V version (90°) 6 or 8- cylinder engines with turbocharging and charge air cooling. ■ Engine and exhaust aftertreatment (EAT) are optimised for highest total system efficiency and thus ensure lowest consumption and total operating cost. ■ Thanks to SCR technology, the cooler sizes do not need to be enlarged in comparison with Tier 3 engines. Fuel consumption is reduced. (applicable for Stage IIIB and IV) ■ Consistent installation and connection dimensions of the engine facilitate the changeover of existing installations to the next stage of the emission laws. ■ The engines have a modular exhaust aftertreatment system (EAT) with components from the DVERT® kit and optional configuration variants. This means a high flexibility in machine integration for the OEM. ■ Best cold starting performance even under extreme conditions. ■ The extremely compact engine design and customer friendly accessories reduce the installation cost and increase the number of applications. ■ Both engines are also available as a flat version for extremely compact installations. ■ The powerful Common Rail injection system and the electronic engine control (EMR) with intelligent link to the drive management ensure optimum engine performance at low fuel consumption. ■ 100% power take-off at flywheel and front end and additionally up to three PTO drives with a total torque of up to 520 Nm. ■ The engines meet the requirements of the EU Stage IIIB & IV and US EPA Tier 4 interim & Tier 4 with SCR. For EU Stage V a DPF is integrated into the EAT system. A variant with-out TECHNICAL DATA Engine type TCD 12.0 V6 TCD 16.0 V8 No. of cylinders Bore/stroke Displacement Max. nominal speed Minimum idling speed min-1 | rpm Specific fuel consumption 2) g/kWh | lb/hph 1) Power data without deduction of fan power 2) Best point consumption refers to diesel with a density of 0.835 kg/dm3 at 15°C. 3) Without starter/alternator, cooler and fluids but with flywheel and flywheel housing The engine company. PEUT

Open the catalog to page 1

CHARACTERISTIC CURVES ■ SCR 1 and 2 are standard in EU Stage IIIB and IV. SCR 1 / DPF is standard in EU Stage V. A DPF will be integrated into SCR 1. * Version without cover plate. Dimension C including cover plate is 891 mm | 35,1 in. All EAT connection variants are available either in 0° or 90° positions for inlet and outlet flanges. Note: The engine dimensions and weights vary depending on the scope of delivery. For more information please contact the DEUTz AG or the responsible sales partner. DEUTZ AG OttostraBe 1 51149 Cologne, Germany Phone: +49 (0) 221 822-0 Telefax: +49 (0) 221...

Open the catalog to page 2

DEUTZ TCD 12.0/16.0 2Pages

Catalog excerpts

All DEUTZ catalogs and technical brochures

DEUTZ TCD 12.0/16.0
2Pages