Catalog excerpts
43 - 129.9 kW|57.7 - 174.2 hp at 2300 min-1|rpm EU Stage IIIA / US EPA Tier 3 Air-cooled 3 to 6-cylinder naturally aspi- Flywheel and end 100% power takeoff rated engines in inline arrangement. possibilities PTO drives for hydraulic pumps and compressor possible, only a few maintenance points, long oil change intervals. 6-cylinder with turbocharging, chargeair cooled. Capacity: 1.1 l/cylinder, modular sys- Very compact engine design reduces tem with single cylinders. The robust engine design allows world- Best cold starting properties even under wide operation even with high sulphur fuels. Low noise emissions due to acoustically optimized components with very smooth running and high durability. extreme conditions. Highly efficient injection and combustion system ensures optimum engine performance at low consumption. The engines in the power range < 56 kW meets to the US EPA Tier 4 i. Technical data Engine type No. of cylinders Bore/stroke Capacity Compression ratio Nominal speeds Power output1) Power output as per ISO 14396 at speed Max. torque at speed Minimum idling speed Specific fuel consumption2) Weight as per DIN 70020 Part 7A3) mm | in l | cu in min-1 | rpm kW | hp min-1 | rpm Nm | lb/ft min-1 | rpm min-1 | rpm g/kWh | lb/hph kg | lb 1) Gross capacity data without deduction of fan capacity 2) Best full load consumption without cooling system refers to diesel with a density of 0.835 kg/dm3 at 15°C | 6.96 lb/US gallon at 60° F. 3) Without starter/dynamo, cooler and fluids but with flywheel and flywheel housing. The data on this data sheet are for information purposes only and are not binding values. The data in the quotation is definitive.
Open the catalog to page 1POWER (kW/hp) POWER (kW/hp) POWER (kW/hp) TORQUE (Nm/lb-ft) TORQUE (Nm/lb-ft) TORQUE (Nm/lb-ft) Note: The engine dimensions and weights vary depending on the scope of delivery.
Open the catalog to page 2Technical data Engine type No. of cylinders Bore/stroke Capacity Compression ratio Nominal speeds Power output1) Power output as per ISO 14396 at speed Max. torque at speed Minimum idling speed Specific fuel consumption2) Weight as per DIN 70020 Part 7A3) kW | hp min-1 | rpm Nm | lb/ft min-1 | rpm min-1 | rpm g/kWh | lb/hph kg | lb 1) Gross capacity data without deduction of fan capacity 2) Best full load consumption without cooling system refers to diesel with a density of 0.835 kg/dm3 at 15°C | 6.96 lb/US gallon at 60° F. 3) Without starter/dynamo, cooler and fluids but with flywheel and...
Open the catalog to page 3Order No. 0031 2175 / 10 / 2011 / VC-CM For more information please contact the DEUTZ AG Köln or the responsible sales partner. ⋅ Ottostraße 1 ⋅ 51149 Köln ⋅ Deutschland ⋅ Telefon +49 (0) 221 822-0 ⋅ Telefax +49 (0) 221 822-3525 ⋅ www.deutz.com ⋅ E-Mail: info@deutz.com
Open the catalog to page 4All DEUTZ catalogs and technical brochures
-
DEUTZ TCD 12.0/16.0 2022
2 Pages
-
BFM 1013
2 Pages
-
DEUTZ TCD 18.0
2 Pages
-
DEUTZ TCD 9.0/12.0/13.5
2 Pages
-
TCD 2012
2 Pages
-
DEUTZ TCD 12.0/16.0 2020
2 Pages
-
TTCD 7.8 L6
2 Pages
-
DEUTZ TCD 7.8
2 Pages
-
DEUTZ TCD 4.1/6.1
2 Pages
-
DEUTZ TCD 3.6
2 Pages
-
TCD 2011
4 Pages
-
DEUTZ TCD 2.9
2 Pages
-
2012 The Genset Engine
2 Pages
-
DEUTZ TCD 2.2
2 Pages
-
DEUTZ G 2.2 - 2.9
2 Pages
-
FL 912
2 Pages
-
TCD 2015M
2 Pages
-
D 2011L
2 Pages
-
D 2011Li
2 Pages
-
2015M
2 Pages
-
TCG 2015
2 Pages
-
TCD 914M
2 Pages
-
DEUTZ Hybrid Drive
2 Pages
-
BFM 2011
2 Pages
-
TCD 2013
2 Pages
-
BFM 1015
2 Pages
-
BFL 914
4 Pages
-
912 The marine engine
4 Pages
-
2015M The marine engine
8 Pages
-
TCD 2013 The genset engine
4 Pages
-
L 2011 The genset engine
2 Pages
-
Flyer Oil Filter
2 Pages
-
Genuine DEUTZ pistons
2 Pages
-
Xchange engines and parts
9 Pages
-
1013M The marine engine
8 Pages
-
1015M The marine engine
8 Pages
-
1015 The genset engine
2 Pages
-
1013 The genset engine
2 Pages
-
M 2011 The genset engine
2 Pages
-
914 The genset engine
2 Pages
-
912 The genset engine
2 Pages