CAM CONTROLS
48Pages

Multifunctional devices Expandable devices for DINrail mounting High-speed devices Cam controls integrated in encoder housing Cam controls with Fieldbusand PROFIBUS interface Operating and display terminals Comfortable PC-programming Absolute rotary encoders Pre-assembled cables Dynamic switching accelerators ETHERNET TCP/IP FAST SWITCHING EVEN IN CASE OF DYNAMIC SPEEDS Protocol Converter Embedded Solutions

Ijff| Deutschmann Technical data LOCON 16 and LOCON 17 6 Technical data LOCON 24 and LOCON 48 10 Technical data LOCON 200 16 Technical data LOCON 100 18 Technical data LOCON 90 20 Technical data ROTARNOCK 100 24 Dynamic switching accelerator SPEEDY 38 Accessories for cam controls and encoders 42

Foreword ▪ Development and production of electronic cam controls since 1982. ▪ Since 1990 the brand names LOCON and ROTARNOCK stand for reliable and fast electronic cam controls. ▪ LOCON – The classical concept of separate control and separate actual value acquisition. ▪ ROTARNOCK – The intelligent solution: cam control and actual value acquisition combined in one housing. ▪ There is no standing still and we are continuously working on the further development of our products and the expansion of our product range. Thus the LOCON and ROTARNOCK series were adapted to the current market needs...

LOCON 16 and LOCON 17 Multifunctional and compact The compact solution in DIN-format 72 mm x 96 mm (width x depth) at an overall depth of 70 mm only. With its integrated operating keyboard the unit is installed into the front plate; the version without keyboard is mounted on a DIN-rail. The „4-key user interface" has proven its worth many thousand times and it can be operated easily after a short training period. The basic version features 16 outputs, 16 programs, blockwise idle time compensation. LOCON 16PM, LOCON 17PM for DINrail Structure of the order code LOCON 16 Basic device example...

I _a_L I your ticket to all buses Basic deviceHard- and software-options Code = Standard ■ = Optionally for an additional charge x = Optionally at no additional charge f!= RS232/485 switchable on board W = Device is alternat

l_a_il your ticket to all buses

• = Standard ■ = Optionally for an additional charge x = Optionally at no additional charge 11 = Automatic switchover between position and speed (speed-dependent) 21 = Run-control function is asssigned to output 16

LOCON 24 and 48 The Multifunctionals Compact series with DIN size of 144 x 144 mm. With an overall depth of 44 mm only, these models feature 24, 32 or 48 outputs. 64 programs can be selected either via the integrated control panel or that can be selected externally, a memory of 1000 data records as well as an extensive range of functions round off the features. The version with integrated control panel for front panel installation (either IP54 or IP65) offers the operating convenience you are looking for: Seven-segment display for position and speed, 2-line LCD with a multi-lingual,...

I _a_L I your ticket to all buses • = Standard ■ = Optionally for an additional charge X = Optionally at no additional charge f = RS232/485 switchable on board & = The unit is alternatively available with or without integrated control panel

l_a_il your ticket to all buses

• = Standard ■ = Optionally for an additional charge x = Optionally for no additional charge s = Freely configurable 11 = Without housing 2 = Standard version for front panel installation 3 = Version for front panel installation IP64

LOCON 200 Fast and modular LOCON 200 consists of a basic unit with the tasks of the central actual-value acquisition, communication with the periphery, voltage supply and some further administration topics. The complete performance capacity is achieved by using the expansion module with 8 I/Os each. Through the consistent arrangement as I/Os the basic module as well as the expansion unit achieve highest possible flexibility and best possible utilization of the hardware. If, for instance only 8 externally selectable programs are required, the otherwise usually reserved pins are not useless...

Powerful and expandable LOCON 100 consists of a basic unit with a total of 16 I/Os. They can be configured depending on the respective application. If, for instance, only a 9-bit encoder is required, then the other encoder connections must not remain useless but can be put to practical use for other applications. The system can be expanded by one module to a total of 48 I/Os which are configured in the same way. So you can assemble your cam control individually and you are totally free regarding outputs, inputs and utilization of functions such as external program selection, encoder type and...

LOCON 90 Powerful and reasonably priced LOCON 90 is a less expensive version of LOCON 200 and LOCON 100. Equipped with 16 I/Os – of which a maximum of 8 can be configured as outputs – this unit is predestined for simple applications. Absolute encoders can be connected via SSI up to a resolution of 13 bit. In case some of the I/Os are configured as inputs, these can e.g. be used as external program selection. LOCON 90 as well features connection facilities for all modern actual-value acquisition systems. Alternatively the device can also be operated as program control unit (timer function)....

|“7fT I Deutschmann I _a_L I your ticket to all buses

l_a_il your ticket to all buses

• = Standard ■ = Optionally for an additional charge x = Optinally at no additional charge s = Freely configurable

Technical data LOCON 100 Characteristics Available versions without integrated keypad DINrail mounting 16 I/Os (32 SW outputs) 48 (with LOCON 100A32) Storable programs Data stored in L100 (-PB/-MB) dependent L100 (-PB/-MB) dependent L100 (-PB/-MB) - absolute encoder parallel Gray code to bit number - absolute encoder SSI Gray code - count/direction inputs for incremental encoders - timer function (value is generated internally) Idle time compensation (dynamic cam) - blockwise - bitwise - separate I/O - entering the idle time in steps dependent L100 (-PB/-MB) dependent L100 (-PB/-MB)...