ntelligent Charging Systems for Vehicle production line and workshop
24Pages

{{requestButtons}}

Catalog excerpts

ntelligent Charging Systems for Vehicle production line and workshop - 1

Charging Systems Power under control Intelligent Charging Systems for Vehicle production line and workshop

Open the catalog to page 1
ntelligent Charging Systems for Vehicle production line and workshop - 2

Deutronic Elektronik GmbH Deutronic, specialist in power electronics is offering intelligent battery charging systems and on-board power supplies for more than 25 years. These systems have been developed continuously further in close cooperation with car manufacturers, especially BMW AG. Therefore they meet the latest requests of automobile technology. The Deutronic Elektronik GmbH is leading supplier in this field with service worldwide and distribution partners. The powerful devices can be used both in workshop application and for example in vehicle final assembly as line power supply....

Open the catalog to page 2
ntelligent Charging Systems for Vehicle production line and workshop - 4

Workshop - Systems l Safe ash-procedure for the DBL700 and DBLW1200 l 100% on board safety l Order option: Refresh mode for regeneration of partially sulphated lead-acid batteries l Option: Version with protection IP65 Systems for workshop/ rework and also for external workplaces Type Input nom. VDC Output Voltage Output Current * further possible versions: 7/28 VDC *2) Professional battery charger featuring D-IPS® technology input stage (explanation on pages 18 and 19) Further characteristics l Protected against environmental inuences (moisture, dust and corrosive atmospheres) through: -...

Open the catalog to page 4
ntelligent Charging Systems for Vehicle production line and workshop - 5

Professional - Systems B Design amongst others Standard Design M Design Systems for use in vehicle production line and in workshops Type Input nom. VDC Output Voltage Output Current Dimensions Standard Version * further possible versions: 28,8/26,4 VDC *1) 480VAC respectively 400-500VAC (Wide range input) o.r. *2) Professional battery charger featuring D-IPS® technology input stage (explanation on pages 18 and 19) Further characteristics l Protected against environmental inuences (moisture, dust and corrosive atmospheres) through: - Sealed housing - Coated modules l Operation as battery...

Open the catalog to page 5
ntelligent Charging Systems for Vehicle production line and workshop - 6

High Performance - Systems Systems for reliable energy supply during motor start and LIP (Line-Inline programming) Type Input nom. VDC Output Voltage Output Current Dimensions Standard Version *further possible versions: 28/60/120VDC *1)480VAC bzw. 400-500VAC (Wide range input) o.r. Further characteristics l Protected against environmental inuences (moisture, dust and corrosive atmospheres) through: - Sealed housing - Coated modules l Prevention against environmental stress due to protection class IP42 l Independent of orientation because of internal fan l Battery charger and adjustable...

Open the catalog to page 6
ntelligent Charging Systems for Vehicle production line and workshop - 7

Battery Charging Computers EBL70 - Smart Charger Type Output Voltage Output Voltage WxDxH Battery Charger EBL70-12 Desulfation mode Various setting modes (automobile, motorcycle and low-temperature charging) Automatic storage of programmed settings after power failure Safety acc. to EN60335, protection IP40 AC/DC input 230VAC / 50Hz, 200 - 375VDC Safety Class II, without protective earth conductor Pluggable to cigarette lighter Overload / over temperature protection Reverse polarity protection Overvoltage protected 100% Burn-In (full-load) Motorcycles Vehicles Lawnmowers Boats Vehicle...

Open the catalog to page 7
ntelligent Charging Systems for Vehicle production line and workshop - 8

Battery Charging Computers Solar Module Type Input nom. VDC Output Voltage Output Current WxDxH Solar Module ESM4 (OBD2)* *order option: battery terminals or cigarette lighter Characteristics Solar Module l The solar battery charger ESM4 is a solar-powered charging system for the charging and charge conservation of 12 volt leaded starter batteries. It can be combined with a maximum of two additional solar battery chargers to boost performance. l The solar panel is implemented in state-of-the-art thin-film technology and consists of a glass/film structure. It is softly embedded in an...

Open the catalog to page 8
ntelligent Charging Systems for Vehicle production line and workshop - 9

DC/DC Converter for Vehicles and Extended Environmental Requirements Forklift Trucks, Electrical and Hybrid Vehicles, MIL, Railway and Industrial Applications DVCH - Direct current HV converter (electrically isolated) Type Output Voltage * further possible versions: 28 VDC *1 higher input voltage etc. For hybrid and electrical vehicles No power on current surge Efficiency 93% DC wide range input Galvanic separation 1,5kV Short circuit and no load test Overvoltage protected Robust construction - potted device Options l Order option: E1 certification l Order option: Inhibit Function l Order...

Open the catalog to page 9
ntelligent Charging Systems for Vehicle production line and workshop - 10

l Parallel connectivity up to 50kW quick charging units Output Voltage Output Current Dimensions Standard Version 100% Protection of on board electronic system/airbag Battery charger and adjustable power supply Extensive protection functions and self-protection functions Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface High charging performance and charging current in a compact housing l 1200W peak performance l 800W steady state charging power (order option: 1200W steady state...

Open the catalog to page 10
ntelligent Charging Systems for Vehicle production line and workshop - 11

Technical Data l Automatic power reduction with higher temperatures (during operation, the current limiter of the charger is automatically matched to the operating conditions ,dependant on the mains voltage, operating temperature, load characteristic, etc.) l 100-240VAC wide-range input for international operation (innovative D-IPS® technology enables an extremely extended input tolerance range - 60-300VAC for short periods), operation e.g. on emergency power generators is possible (aggregates with or without inverter technology) l 12VDC input to connect to vehicle starter batteries (order...

Open the catalog to page 11
ntelligent Charging Systems for Vehicle production line and workshop - 12

Applicable Types Wallmount for static fastening Transport system type 1 for 1 battery charger Option: Cable reel 25m External signal lamp (DBL-SIG-LR) Transport system type 2 for 2 battery chargers Option: Cable reel 25m External signal lamp (DBL-SIG-LR) Charging cable, 16mm², 200A High exible cable with cable connector and charger clips 3,0m 5,0m Mains cable with moulded connector and coupler receptacle acc. to IEC320 1,5m 3,0m 5,0m Mains cable (spirally) Charging cable set to charge in parallel operation 5,0m Cable-Reel System Length of charging cable 5m 1,5m assembled feed line about...

Open the catalog to page 12

All DEUTRONIC catalogs and technical brochures

  1. DVCH3003-700

    8 Pages

  2. DVCH3003-400

    8 Pages

  3. DVCH1503-700

    7 Pages

  4. DVCH1503

    9 Pages

  5. ESC15H

    3 Pages

  6. ETC70H

    3 Pages

  7. DVC75

    4 Pages

  8. DR25N 25

    3 Pages

  9. EHB50W

    5 Pages

  10. EHB200W

    4 Pages

  11. E0,25K

    3 Pages

  12. ET40

    3 Pages

  13. E-TOP 480/3W

    4 Pages

  14. D-IPS 150

    6 Pages

  15. EDR

    3 Pages

  16. E-TOP 5

    5 Pages

Archived catalogs