DEUBLIN SERIES SWiVel JOjntS *- DEUBLIN' Engineered for Performance Special design features : ■ Two rows of widely spaced bearings support heavier loads. ■ Three-piece design simplifies repair. ■ Spring energized seals offer leak-tight sealing at all pressures, including vacuum. ■ Seal can be replaced without removing bearings. ■ Available in three seal materials that are compatible with many gasses, fluids & chemicals. Easy numbering system DEUBLIN Plane Swivel Joints provide 360° movement between piping elements in one or more planes for conveying or transferring a wide range of fluids including oils, water, air, gasses and chemicals. Available in three types: threaded, welded and flanged to suit your application. Simple design permits ready installation and fast easy maintenance. -01 Buna-N Seal -02 Teflon® Seal -06 Viton Seal Size Code = in inches = millimeters 0 Carbon steel 1 Stainless steel (special orders only) Style of connection and angles

Plane Swivel Joints DEUBLIN supplies several different styles and sizes to suit your particular application.WELDED END STYLE (available in 3” thru 6”) Welded end BD-5141 Threaded end BD-5241 THREADED END STYLE (available in 1” - 3”) Welded end BD-5142 Threaded end BD-5242 * also available in BSPT threads FLANGED END STYLE (available in 3” thru 6”) Supplied with ANSI 150 lb. Flange pressure temperature ratings for over +100 °F (37.5 °C) Special flanges available. Contact DEUBLIN Specifications subject to change without notice. Copyright © 2013 DEUBLIN Company ( - DEUBLIN V DEUBLIN Company 2050...

DEUBLIN SERIES Self-Aligning Swivel Joint Handles rotary and angular alignment motion with positive sealing. Special design features : 10°angular flexibility permits positive positioning of lines. Outperforms and outlasts flexible hose with lower pressure drops. Faster and easier piping installation. Fabrications simplified. Eliminate the hazards of leaking pipe connections or catastrophic hose failures. Dog-leg arrangements accommodate hinged and lifting motions of presses. Nut Casing DEUBLIN is recognized as the pioneer and leader in the development and manufacture of spring-loaded, single-seat...

DEUBLIN supplies several different styles and sizes to suit your application. * Basic assembly number—Standard Series, All Bronze, available in 1/2” (13mm) and 3/4” (19mm) sizes. Dimensions located in Table 1. ** Basic assembly number—Standard Series, Malleable Iron Casing with Bronze Nut & Ball. Available in 1/2” (13mm) to 1-1/2” (38mm) sizes. Dimensions located in Table 1. *** Basic assembly number—Series 600, All Steel, available in 1-1/4” (32mm) and 1-1/2” (38mm) sizes. Dimensions located in Table 2. TABLE 1 DIMENSIONS / STANDARD SERIES, — inches & mm

Non-shock operating pressure—psig Non-shock operating pressure—psig OPERATING DATA Standard Series Teflon Gasket (11 CTS) 400 Saturated Steam Standard Series Glass-filled Teflon Gasket (11 GCTS) 400 Non-shock operating pressure—psig Saturated Steam Series 600 Bronze-filled Teflon Gasket (11BCTS) Glass-filled Teflon Gasket (11GCTS) DEUBLIN SERIES 600 / ALL STEEL, INJECTED FLAKED GRAPHITE SEALANT. Designed for hot oil and high-pressure steam applications. These joints come standard with socket weld ends. Available with flanged ends on special request. Contact DEUBLIN. OPERATING DATA Hot Oil - 200 psig...

DEUBLIN “Non-flex” Collar The “Non-Flex” Type Swivel Joints are available in the same styles, sizes, and materials as standard swivel joints, but a steel split collar is added between the nut and the gasket. The neck of the ball is machined to provide a bearing with this collar. This allows 360° rotation, but eliminates the 10° side flexing. In dogleg, or three-joint assembly, it is recommended that the “Non-Flex” swivel joint be used only at the top anchor point of the assembly. Regular swivel joints at the other two points relieve binding and allow for piping misalignment. DEUBLIN easy to follow...