CORRUGATING SOLUTIONS www.deublin.com

STEAM JOINT AND SIPHON SYSTEM FOR ALL CORRUGATING APPLICATIONS To achieve maximum heat transfer to the surface of the roll, the condensate from inside the roll must be evacuated. Corrugating machines use stationary or rotating siphons to evacuate condensate. A large majority of siphon systems used in corrugating operations employ stationary siphons. Maintaining minimal clearance between the siphon and the surface of the roll and its orientation in the vertical, downward position requires a rigid siphon support system. This configuration is available in all DEUBLIN steam joint and stationary siphon...

CORRUGATING OVERVIEW STEAM JOINTS DEUBLIN steam joint and siphon systems enhance productivity by more reliably inducing steam into the rolls and removing condensate. DEUBLIN systems eliminate a number of common problems: Broken siphons Short seal life Leaking gaskets Cold spots Self-supported steam joints are single-piece units that mount directly onto the roll journal, simplifying installation and replacement. Carbon graphite bushings support the steam joint housing relative to the rotor. Rod-supported steam joints are mounted on support rods that are secured to the frame of the machine. This...

Series for High Pressure Steam Service in Corrugators CMS50S STEAM JOINT WITH STATIONARY SIPHON The CMS50S has been designed for drop down stationary siphon application. The housing features a collet mechanism to offer a rigid support of the stationary siphon. This also allows the siphon pick-up surface to be held at a uniform clearance from the surface of the roll. In addition, the siphon clearance can be adjusted by an external siphon clearance adjustment mechanism. CMS50R STEAM JOINT WITH ROTATING SIPHON The CMS50R has been designed for a rotating siphon application commonly used in gun-drilled...

Spring Reinforced Siphon (SRS) Elbow Siphon ADJUSTMENT SCREW VS. SIPHON CLEARANCE 0.7 0.6 36" LONG SIPHON 48" LONG SIPHON Recommended Minimum Siphon Clearance is .250 in Turbulence Bars - breaks rimming condensate and improves heat transfer

Series for High Pressure Steam Service in Corrugators Operating Data Maximum Saturated Steam Pressure 250 PSI Maximum Speed 400 RPM Maximum Temperature 400°F • Duoflow design • Self-supported rotating union • eals and bearings made of special Carbon Graphite S • onvex seal ring better suited to handle mechanical C and thermal shock • External mechanism to adjust siphon pipe through end cap • Stainless steel spring • Heavy duty steel rotor design • Dual bearings for extended service life • Siphon Type: Stationary • Siphon Size: 1/2” Series for High Pressure Steam Service in Corrugators Operating...

Flange Adapter Kits HPS B with Stationary Siphon (H40-052-220737) HPS B with Rotating Siphon (H40-058-223741) HPS C with Stationary Siphon (HS40-500013) with 7/8”-9 UNC Rods* HPS C with Stationary Siphon (HS40-500014) with M20 x 2.5 Rods* Union Ordering Number Siphon B O C Ø Size Port Port /" HPS C with Rotating Siphon (HS40-500016) with 7/8”-9 UNC Rods** HPS C with Rotating Siphon (HS40-500015) with M20 x 2.5 Rods** F2 Ø Ship Weight

Since its founding in 1945 as a small, family-owned business, Deublin consistently has adhered to a policy of designing and building the best products of their kind in the world. The result of this policy has been constant growth through the years, and for this we are grateful to our many loyal customers. Today, Deublin is the world’s largest manufacturer of rotating unions, with state-of-the-art factories, technical sales and service, and local stocking in 15 countries on four continents, as well as a worldwide distribution network operating from more than 60 countries. Our global organization...