X3301 Multispectrum IR Flame Detector spec sheet
2Pages

SPECIFICATION DATA Multispectrum IR Flame Detector X3301 Shown with Q9033A Aluminum Mounting Arm The X3301 is a multispectrum infrared (MIR) flame detector. It provides unsurpassed detection of fires from light to heavy hydrocarbon fuels combined with the highest degree of false alarm rejection. The detector has Division and Zone explosionproof ratings and is suitable for use in indoor and outdoor applications. The X3301 contains three IR sensors with their associated signal processing circuitry. The standard output configuration includes fire alarm, fault and auxiliary relays, with an isolated 0 to 20 mA output model with optional HART communication. The detector provides superior performance in applications that are at the extremes, and where background infrared radiation is a normal condition: — Hangars — Offshore production platforms — Offshore production ships — Refineries — Production facilities — Loading racks — Compressor stations — Turbine enclosures — Airport water curtains — Automotive Painting — LNG/LPG — Gas Separation Plants — Warehousing — Marine Complies with FM 3260 EN54 certified Certified SIL 2 capable ATEX Directive compliant Certified performance to multiple fuel types and fire sizes EQP models available Long detection range to carbonaceous fires HART models available FDT/DTM capable Multiple sensitivity levels Maximum false alarm rejection Reliable flame detection with modulated IR background Microprocessor controlled heated optics Calibrated automatic optical check for each sensor eliminates need for testing with external test lamp ▲▲ RFI and EMC Directive compliant ▲▲ Event logging with time and date stamp ▲▲ Integral wiring compartment for ease of installation ▲▲ Operates under adverse weather conditions and in dirty environments ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ ▲▲ BENEFITS Single detector for multiple hydrocarbon fuels Low cost of coverage Ability to detect smaller fires earlier Solid cone of vision to 125 feet for methane Better detection zoning capability Best combination of flame detection and false alarm rejection Low maintenance costs Reliable fault diagnostics Suitable for heavy industrial applications Explosion/flame proof (Ex d) or increased safe

SPECIFICATIONS Operating Voltage 24 Vdc nominal (18 Vdc minimum, 30 Vdc maximum). Maximum ripple is 2 volts peak-to-peak. Shipping Weight (Approximate) Aluminum: 7 lbs. (3.2 kg). Stainless Steel: 13.8 lbs. (6.3 kg). Power Consumption 4 watts minimum (without heater), 17 watts at 30 Vdc with EOL resistor installed and heater on maximum. 90° horizontal by 75° vertical, at a minimum of 70% Contacts rated 5 amperes at 30 Vdc. Fire Alarm: — Form C (NO and NC contacts) — normally de-energized — latching/non-latching. Fault: — Form A (NO contacts) — normally energized — latching/non-latching....