PRODUCT INFORMATION SHEET Actual status: 15.02.18 PRIMARY PULSED POWER SUPPLY, 2 A VdS-approval G 209142 Universal primary pulsed mains adapter for the use as an emergency power supply unit for the detect 3000 range. Approved according to EN 54-4 A1 2002, A2 2006 and VdS for the use according to VdE 0833 • Recommended for fire alarm and detection system and other safety systems • Well-appointed indication the technical condition • Maximum battery life is assured through continuous active battery monitoring • Deep discharge protection disconnects battery from load when battery voltage falls to 21 V • Battery charging circuit is energised only when a battery is correctly connected • Mains indicator LED (green) showing mains present • Fault indicator LED (Red) flashes on detection of output fault, battery fault, charger fault and mains failure • With 2 solid state relay output contacts • Mains indicator LED (green) showing mains present • Fault indicator LED (Red) flashes on detection of output fault, battery fault, charger fault and mains failure • With 2 solid state relay output contacts Technical Data Battery capacity Input Voltage Output voltage Output current Protection class Ambient temperature Storage temperature Sheet metal Further approvals Detectomat GmbH An der Strusbek 5 22926 Ahrensburg, Germany Product changes, technical changes