Leaflet AFD
36Pages

{{requestButtons}}

Catalog excerpts

Leaflet AFD - 1

Industrial Auto Feed Drills & Tappers • Comprehensive range • Single spindle operations • Multi-spindle processes

Open the catalog to page 1
Leaflet AFD - 2

AFD Applications Ease of Integration into Machine or Process • Extensive range of mounting clamps • Control interfaces to link AFD(E) to other equipment through pneumatics or electrically • Single signal required for AFD(E) to perform cycle • Output signals at datum and depth • Electric motor mounting on 200, 400 and 600 series can be rotated 180° Comprehensive range of Product • For single spindle operations to multi spindle processes • Pneumatic and electric drive from 0.22 to 1.1kW (0.3 to 1.47hp) with thrusts from 1735N (390lbf) • Reliability through quality Modular Design • Flexibility...

Open the catalog to page 2
Leaflet AFD - 4

Auto Feed Drills & Tappers Features Rigid cast aluminium housing Optional hydraulic control unit for fine feed control and reduction of ‘break through’ force Integral belt tensioner Modular Control Block Options A1- Full Feature Block Pneumatic signal ports for stop, start and cycle complete Capable of using proximity switches to sense depth and datum positions Control of feed and retract speed A6 - Simple Control Block Forward and retract port for control via remote valves Capable of using proximity switches to sense depth and datum positions Front of tools sealed to IP64(1)...

Open the catalog to page 4
Leaflet AFD - 5

CONTROL BLOCK output spindle .. I - Interface K v^pjr (see page 23 to 32) Control Block A1 - Full feature type111 - Automatic cycle A6 - Simple type111 - Remote cycle control A7 - Leadscrew type - PNP A8 - Leadscrew type - NPN Output Spindle Code Output type - Chuck - Collets - Multi Head - Tapper

Open the catalog to page 5
Leaflet AFD - 6

How to select your AFD Electric drive - Pneumatic feed Type and Speed Hard wood Mild Steel Dynamic thrust Maxium stroke

Open the catalog to page 6
Leaflet AFD - 7

General Data ■ Multi spindle Drilling To calculate the cross sectional area of a drill diameter use the formula u(r2) (3.14 x radius2) For example, Area of 0 6mm hole 3.14 x 3 x 3 = 28.26mm2 1. Calculate cross sectional area of hole by refering to the table belowor the formula. 2. Calculate the cross sectional area of a hole by the number of spindles. 3. Select the nearest greater hole cross sectional area from the table. 4. From the specification charts on pages 6 and 7 select the AFD with the appropriate capacity. Example - AFD415 5 off 0 1.5mm holes to be drilled in aluminium - 1.766 x 5...

Open the catalog to page 7
Leaflet AFD - 8

• High speed options up to 22400 rpm @ 50Hz, 26900 rpm @ 60Hz with K42 output • Capacityupto5mm(3/16»)in aluminium • Modular output spindles For use with H21 Tapping Gearbox or Multi-spindle heads output spindle K35 is needed Tapping gearbox & Accessories: see pages 22-32 model PART number model part no. Ca nada CsA 575V (60Hz) All models: Weight: 10.1 kg (22.2lb) - Air consumption per cycle: <0.032 l/s (<0.02 cfm) - Sound level: <70 dB(A)

Open the catalog to page 8
Leaflet AFD - 9

Electric drive - Pneumatic feed

Open the catalog to page 9
Leaflet AFD - 10

• options of compact AFD205 or long stroke AFD215 • High thrust/size ratio • Capacity up to 5mm (3/16») in aluminium • Modular output spindles Tapping Gearbox or Multi-spindle heads output spindle K35 is needed Tapping gearbox & Accessories: see pages 22-32 pic. ■model part number speed power thrust stroke weight tapping Motor power Dynamic thrust working stroke AVAILABLE rpm kw hp N Ibf mm in. kg lb Nm Ibf.in All models: Air consumption per cycle: 9.5 l/s (20 cfm) - Sound level: <75 dB(A)

Open the catalog to page 10
Leaflet AFD - 11

Pneumatic drive - feed AFD205 - AFD215

Open the catalog to page 11
Leaflet AFD - 12

Tapping gearbox & Accessories: see pages 22-32 • 330-10000 rpm @ 50Hz, 400-11900 rpm @ 60Hz • 0.33kw (0.44HP) and 0.75kw (1.00HP) options • Capacity up to 10mm (3/8») in aluminium, 8mm (5/16») in mild steel • spindle sealed to IP64 standard • Modular output spindles For use with Multi-spindle heads output spindle B24 is needed model All models: Working stroke: 100mm (3.94”) - Air consumption per cycle: <1 l/s (<0.04 cfm) - Sound level: <70 dB(A)

Open the catalog to page 12
Leaflet AFD - 13

Electric drive - Pneumatic feed AFDE400 - AFDE430 - AFDE410 - AFDE440

Open the catalog to page 13
Leaflet AFD - 14

• Long working stroke of 100mm (3.94») • spindle sealed to IP64 standard • Capacity up to 10mm (3/8») in aluminium, 8mm (5/16») in mild steel • Modular output spindles For use with Multi-spindle heads output spindle B24 is needed Tapping gearbox & Accessories: see pages 22-32 AFD415-490 205 148 016 4 490 0.38 0.51 706 159 100 3.94 6.2 13.7 9.9 87.6 All models: Air consumption per cycle: 9.9 l/s (21 cfm) - Sound level: 75 dB(A)

Open the catalog to page 14
Leaflet AFD - 15

Pneumatic drive - feed

Open the catalog to page 15
Leaflet AFD - 16

Tapping gearbox & Accessories: see pages 22-32 For use with J19 Tapping Gearbox or Multi-spindle heads output spindle B24 is needed see pages 24-25 model Air consumption per cycle: <2.5 l/s (<0.09 cfm) - Sound level: <70 dB(A)

Open the catalog to page 16
Leaflet AFD - 17

Electric Drive - Pneumatic Feed AFDE610 - AFDE640

Open the catalog to page 17
Leaflet AFD - 18

For use with J19 Tapping Gearbox or Multi-spindle heads output spindle B24is needed control output Tapping gearbox & Accessories: See pages 22-32 model Drilling performance specification Air consumption per cycle: 16.5 l/s (35 cfm) - Sound level: <87 dB(A) Silencers for Air Motors are not supplied with complete tools

Open the catalog to page 18
Leaflet AFD - 19

Pneumatic drive - feed AFD684 SILENCER OPTIONAL ACCESSORIES PART NO. 1 Silencer - sinter bronze (noise clamp 15 dB(A) - Power loss 10) (noise clamp 20 dB(A) - Power loss 10) (noise clamp 25 dB(A) - Power loss 7)

Open the catalog to page 19
Leaflet AFD - 20

0.75 kW (1hp) - 180 to 1740 rpm • High power brake motors with 0.75kW (1 HP) • Supplied fitted with proximity switches for depth, datum and ‘no hole’ sensing, PNP • Quickreleaseinterchangeable lead-screw and nut assembly • Capacity up to 10mm (3/8») in mild steel, 16mm (5/8») in aluminium depending on thread form shape replacement ordering thread replacement ordering thread SIZE / PITCH LEADSCREW / NUT CODE SIZE / PITCH Other leadscrews available to special order. Drilling performance specification

Open the catalog to page 20

All Desoutter Industrial Tools catalogs and technical brochures

  1. E-LIT

    8 Pages

  2. SERVICE

    20 Pages

  3. AIR MOTORS

    34 Pages

  4. PTF Series

    4 Pages

  5. CVI3

    12 Pages

  6. ECS Posco

    8 Pages

  7. KL Grinders

    2 Pages

  8. SLC & SLK

    8 Pages