VAC

VAC

VAC

Product catalog summary
Applications
  • Both VAC-2000 and VAC-4001 are suitable for use as emergency bilge pumps, bilge-ballast pumps, general service pumps, vacuum pumps, gland-leaking water pumps, and in chemical industries. They are also used for draining holds, emptying vessels, and well point systems.
Technical Specifications
  • VAC-2000: Features DN 65 suction/discharge pipe connections, a maximum capacity of 20 m3/h, and a total head of 1.6 bar. It has a suction head of 92% (approx. 9.6 mLC) and is available in cast iron and bronze. It can be configured with a free shaft end, electric motor, or diesel engine, and is available in a submerged version.
  • VAC-4001: Features DN 100 suction/discharge pipe connections, a maximum capacity of 85 m3/h, and a total head of 2.0 bar. It also has a suction head of up to 92% (approx. 9.6 mLC) and is available in cast iron and bronze. It can be configured with a free shaft end, electric motor, or diesel engine, and is available in a submerged version.
Design
  • Both models are based on the liquid ring system and combine the performances of diaphragm, piston, and centrifugal pumps. They feature a free rotating stainless rotor, stainless steel rotor housing, and wear plate, with protection against dry-running through oil-lubricated seals.
Advantages
  • Both models offer enormous air capacity, wear resistance, dry-running protection, and can operate without a non-return valve. They are designed for direct or V-belt drive, have no diaphragms, are lightweight, and have a compact design.
Additional Information
  • VAC-2000 is complete with a flexible coupling and electric motor of 2.2 kW at 2850 RPM.
  • VAC-4001 is available in a close-coupled design with an electric motor of 5.5 kW at 2850 RPM.

For more information on Marine & Offshore solutions, please visit www.desmi.com.

See more

Catalog excerpts

VAC-1

Advantages VAC-2000 Enormous air capacity Wear-resistant Dry-running protection For direct or V-belt drive No diaphragms Low weight Compact design Also operating without non-return valve Design VAC-2000 A pump series with many applications and a generation of dirty water vacuum pumps, based on the principle of the liquid ring system. This compact pump type combines all performances of DIAPHRAGM, PISTON and CENTRIFUGAL PUMPS and will, by means of the specially developed rotor, continuously pump liquids as well as air or gasses in any mixture. Free rotating stainless rotor, stainless steel rotor housing, stainless steel wear plate. Protected against dry-running by oil lubricated seal. Applications VAC-2000 • (Emergency) bilge pump • Bilge-ballast pump • General service pump • Vacuum pump • Gland-leaking water pump • For chemical industries • Draining holds • Emptying vessels • Well point systems Technical specifications VAC-2000 Type: VAC 2000 Pipe connections: DN 65 suction/discharge Suction head: 92% (approx. 9.6 mLC) Free shaft end, with electric motor or diesel engine, with friction clutch and V-belt pulley. Submerged version also available. VAC 2000 with free shaft end. VAC 2000 is complete with flexible coupling and electric motor 2.2 kW at 2850 RPM. Available in cast iron and bronze in the following combinations: For more information on Marine & Offshore solutions, please visit www.desmi.com MARINE & OFFSHORE DEFENCE & FUEL

 Open the catalog to page 1
VAC-2

Advantages VAC-4001 • Enormous air capacity • Wear-resistant • Dry-running protection • For direct or V-belt drive No diaphragms Low weight Compact design Also operating without non- Design VAC-4001 A pump series with many applications and a generation of dirty water vacuum pumps, based on the principle of the liquid ring system. This compact pump type combines all performances of DIAPHRAGM, PISTON and CENTRIFUGAL PUMPS and will, by means of the specially developed rotor, continuously pump liquids as well as air or gasses in any mixture. Free rotating stainless rotor, stainless steel rotor housing,...

 Open the catalog to page 2

All DESMI Pumping Technology A/S catalogs and technical brochures

  1. AquaCulture

    16  Pages

  2. ROTAN® ED

    2  Pages

  3. ROTAN® PD

    2  Pages

  4. ESL & ESLH

    2  Pages

  5. NSL

    4  Pages

  6. DESMI Grafter

    4  Pages

  7. CS Boom

    4  Pages

  8. Ro-Kite

    2  Pages

  9. Oilfence

    2  Pages

  10. Arctic range

    16  Pages

  11. OIL FENCE

    2  Pages

  12. DESMI KaziCat

    4  Pages

  13. Commissioning

    4  Pages

  14. DESLUBE

    1  Page

  15. Modular S

    2  Pages

  16. Company profile

    24  Pages

  17. Pyroboom

    8  Pages

  18. OptiSave

    20  Pages

  19. OptiClean

    2  Pages

  20. NSLV/NSLH

    4  Pages

  21. Modular H

    1  Page

  22. ESL

    2  Pages

  23. OptiPower

    8  Pages

  24. DSL

    2  Pages

  25. NSA

    1  Page

  26. SA

    2  Pages

  27. PVLN

    2  Pages

  28. A-BOOM

    2  Pages

  29. ALLIGATOR

    2  Pages

  30. CRANE SWEEPER

    2  Pages

  31. TRAILER

    2  Pages

  32. POLLCAT

    2  Pages

  33. POLLKITTEN

    2  Pages

  34. POLLCRAFT

    2  Pages

  35. RO-MAR

    2  Pages

  36. WINDERS

    2  Pages

  37. HOSE REEL

    2  Pages

  38. GLOBEBOOM

    2  Pages

  39. NS-1B

    2  Pages

  40. NS-1S

    2  Pages

  41. NS-2B

    2  Pages

  42. NS-2S

    2  Pages

  43. NS-3B

    2  Pages

  44. OS-1B

    2  Pages

  45. OS-1S

    2  Pages

  46. OS-2B

    2  Pages

  47. OS-2S

    2  Pages

  48. POLLUTANK

    2  Pages

  49. PyroBoom®

    2  Pages

  50. ROTAN PD

    2  Pages

  51. ROTAN HD

    2  Pages

  52. ROTAN GP

    2  Pages

  53. Ethanol Syrup

    2  Pages

  54. ROTAN ED

    2  Pages

  55. ROTAN CD

    2  Pages

  56. Cargo

    8  Pages

  57. DESMI 48

    8  Pages

  58. Asphalt

    2  Pages

  59. Chocolate

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.