PyroBoom® - The New Standard for In-Situ Burning Proven Oil Spill Technology PROVEN TECHNOLOGY

In-situ burning, once reserved for oil spills in remote regions, is now considered a practical alternative to mechanical removal under specific conditions. Experience from the Deepwater Horizon Spill in the Gulf of Mexico validated "controlled burning” as an effective technique and PyroBoom® proved itself to be an excellent performer. Performed properly, under the right conditions, In-situ burning can rapidly eliminate large quantities of oil, efficiently, with minimal and generally acceptable net environmental impact. In the Gulf, PyroBoom® played a key role as In-situ burning helped to greatly...

Developed specifically for In-situ burning of oil, PyroBoom® is the only product that meets all the responder's needs from the Arctic to the tropics. In numerous burn tests, including those conducted in accordance with ASTM F 2152, PyroBoom® has repeatedly demonstrated its effectiveness, survivability and ease of use. Advantages of PyroBoom® Other fire booms, including those using active water-cooled fabric blankets, are subject to burn-through and catastrophic failure, especially if any component in the complex water cooling system fails. In addition, these designs are complicated to use, requiring...

Proven in the Gulf and in the Arctic 24 Hour test burn No Inflators No Power Packs No Water Pumps No Reels No Wet Blankets Simple, proven, reliable and reconditionable Lower acquisition cost and lowest life cycle cost of the leading brands

Stainless steel shackle Folded urethane fabric Stainless steel fasteners Stainless steel cable tension member Silicone coated Inconel & refractory barrier fabric Stainless steel stiffening bracket Hemispherical stainless steel float shells filled with glass foam Stainless steel piano hinge end connectors Vulcanized nitrile coated polyester/nylon Ballast chain

Technical specifications PyroBoom® Specifications PyroBoom® in a 20 foot container or in cages. Makes storage and transport very easy. Two PyroBoom® Burn Kits shown flaked on deck. PyroBoom® is protected under U.S. patent number 4605586; other patents applied for PyroBoom® is a registered trademark of Applied Fabric Technologies, Inc., a subsidiary of DESMI Ro-Clean. Fiberfrax® is a registered trademark of the Unifrax Corporation.

DESMI offices: Africa DESMI Africa Ltd. Tel.: +255 757597827 DESMI Pumping Technology (Xuancheng) Co., Ltd. Tel.: +86 563 2612 570 Germany DESMI GmbH Tel.: +49 407 519847 Denmark DESMI A/S - Group Head Quarter Tagholm 1 DK-9400 Norresundby Tel.: +45 96 32 81 11 Greece DESMI Greece Tel.: +30 6944 149 446 Singapore DESMI Singapore Pte Ltd. Tel.: +65 62 50 71 77 China DESMI Pumping Technology (Suzhou) Co., Ltd. Tel.: +86 512 6274 0400 DESMI Pumping Technology A/S Tel.: +45 96 32 81 11 DESMI Pumping Technology (Suzhou) Co., Ltd. UAE DESMI Pumping Technology A/S (Br.) Dubai Office Tel.: +971 4 501...