Energy Efficient Pumps and Pump Solutions for District Cooling PROVEN TECHNOLOGY DESMI

District cooling follows a simple process: • Water is chilled at a central cooling plant (or taken from the sea). • Chilled water is pumped through a network of underground pre-insulated pipes to customers’ buildings. • An air-conditioning water system inside the customers’ building circulates the chilled water. • Air is then pumped through the chilled water piping of the airconditioning system producing cold air. District Cooling is 40% - 60% more energy efficient than conventional systems – and reduces CO2 emissions. If District Cooling were to expand to 25% of the cooling in Europe, 42-50...

About DESMI We are one of the most experienced industrial companies in Denmark, established back in 1834 – as a foundry in Aalborg, in Northern Denmark. DESMI provides competitive pump solutions both commercially as well as financially. This requires continuous investments into R&D and currently (2014) we are implementing a larger product development in order to increase our pumps’ energy efficiencies even more. Today we are a modern international group with a global presence. We take pride in being in full control of our product quality – with our own factories, R&D department as well as service...

District Cooling District Cooling is an efficient and environmentally friendly utility service, which provides chilled water from a centralized cooling plant (or cold water from the sea) through a network of pipes to multiple residential, industrial and commercial buildings for air conditioning purposes. District Cooling is simple and clean. It creates a cool, efficient indoor climate, without the need for bulky refrigeration equipment and noise in or near residences. The supply is assured year-round with minimal maintenance needed, which is reflected in reduced operating costs and lower investment...

DESMI Competences - District Cooling Denmark is recognised for being a global leader within District Heating as well as District Cooling, due to extensive use in Denmark (today more than 60% of total energy used for heating originates from District Heating). This has assisted us at DESMI in becoming a premier technology supplier in this field. Creation of pump solutions for District Heating goes back approx. 90 years and remain market leaders, developing new technologies and solutions e.g. 4th generation (low temperature) District Heating, among others. Since District Cooing is built on similar...

Copenhagen, Denmark - Case Story HOFOR has the English name “Greater Copenhagen pumps due to supplying marine pumps for moer Utility”. than 100 years. District cooling concepts with HOFOR: • In the winter months, production of cooling is by seawater, which is brought into the cooling system by a pipeline from the harbour. Production is totally free of CO2 emission and is called free cooling. • The seawater is not cold enough in the summer months to cover the whole cooling demand. Therefore, surplus heat is used to produce cooling as well. This method is called absorption cooling. • A compressor...

NUON Energy - Case Story Nuon, part of Vattenfall, is a leading energy company that generates electricity and produces gas, heating and cooling, which it supplies to approximately 2.2 million households, companies and organizations in the Netherlands. In 2009 DESMI supplied some of our energy efficient pumps to Nuon for a district cooling project in the south area of Amsterdam. Capital Cooling from Sweden did the engineering. The DESMI pumps supplied (NSL 300/525/A02-I complete with 630 kW 3 x 690 Volts 1800 rpm e-motors) are used to distribute lake water to the heat exchangers in the production...

Dubai Metro - District Cooling, UAE – Case Story The Dubai Metro is the world’s first districtcooled mass transit system, according to Stanley Consultants. A distribution network provides centralised cooling via pre-insulated, buried steel piping to all Dubai Metro stations. Five district cooling plants were built specifically for the Dubai Metro, with the following installed capacities: • • • • • Al Rigga 10,000 TR Al Barsha 7,500 TR Jumeirah Island 7,000 TR Jebel Ali Industrial 4,400 TR Al Rashidiya 7,500 TR A total of 52 km / 32 miles of piping was needed for the district cooling network....

Doosan Heavy Industry - District Cooling, Korea - Case Story Korea - Cooling Application for Doosan Heavy Industry Factory Name of Scheme: “The improvement of System 6 of Doosan Heavy Industry Co”. Doosan is one of Korea's foremost EPC contractors for plant projects inside or outside Korea. They fabricate, cast and compress metal materials needed by industry. Their business system creates consistency across all of Doosan's businesses, maximizing the efficiency and driving the performance-based culture. That is exactly why DESMI were asked to conduct a survey based on the supply on 9 DESMI NSL...

District Cooling Projects A Few Examples on Projects already won by DESMI: • Sweden - Process Pumpar e.g. NSL 80-265, 100265, 125-330, 150-265, 150-215, 200-265, 250330, 250-415 centrifugal pumps. • Czech Republic - Renetra NSL pumps. • Korea - Hanyang University - NSL 150-330, 200330, 250-330, 250-265, 300-415 centrifugal pumps. • Korea - Seoul Semiconductor, Ansan - NSL 125415, 250-330 centrifugal pumps. • Korea - POSCO Pohang 1 & 2 - NSL 80-265, 250415 centrifugal pumps. • Korea - Iljin Steel - NSL 200-525, NSLD 300-415 centrifugal pumps. • China - Novozymes Biotechnology Plant, Tianjin DSL...

DESMI Pump Solutions - District Cooling Vertical & Horizontal In-Line and End Suction Pumps DESMI NSLV DESMI NSLH Pump selection programme available for download All centrifugal pumps can be selected by our DESMI Pump Selection Programme called WinPSP. The program is available for download from www.desmi.com The program can be used by designers, operators, service providers and anybody who wants pump information. Find curves for existing pumps, obtain GA drawings for initial designs and compare efficiency, motor power, NPSH and other data to select the right pump - Alternatively contact DESMI...