Catalogs >
DES >
edv-015-1250

edv-015-1250
2Pages

Catalog excerpts

SPECIFICATION OUTPUT WATTAGE 15 watts OUTPUT VOLTAGE 12 Volts EDV-015-1250-012-A 12 Volt Constant Voltage LED Driver The EDV Constant Voltage driver offers you higher efficiency over a wider current rating and a high power factor. All drivers are UK designed and manufactured, incorporating premium grade components as standard. The use of these components ensures all drivers maintain a high power factor and low operating temperatures. All DSE LED Drivers are designed to achieve a minimum operating lifetime of 50,000 hours. DSE’s comprehensive testing procedures ensure all products perform to the highest possible levels with the world’s leading LED manufacturers, including: Bridgelux, Citizen, Cree, Luxeon, Nichia, Osram, Seoul and Sharp. All drivers are housed in a robust white plastic case and include 1-7mm cable clamping as standard. KEY FEATURES • Up to 85% operating efficiency • 0.92 power factor • 1-7mm secure cable clamping • Double insulation (Class II) • Short circuit protection • Open circuit protection • Over temperature protection • Mains surge protection • Automatic thermal cut-out • UK designed and manufactured INPUT EFFICIENCY 85% at full load POWER FACTOR 0.92 at full load VOLTAGE 198 to 265 V AC FREQUENCY 50/60 Hz PROTECTIONS Mains surge Over load Open circuit Short circuit Thermal cut-out DIMENSIONS 186 mm x 31. 7 mm x 32.5 mm WEIGHT 120g ENVIRONMENTAL STANDARDS OPERATING TEMPERATURE -25° C to +50° C STORAGE TEMPERATURE -30° C to +70° C RELATIVE HUMIDITY 95% non-condensing LIFE TIME 50,000 hours (minimum) DEGREES OF PROTECTION PROVIDED BY ENCLOSURES IP 40 SELV DEEP SEA ELECTRONICS PLC Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL sales@deepseaplc.com WEBSITE www.deepseaplc.com Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

Open the catalog to page 1

12 Volt Constant Voltage LED Driver Efficiency Power Factor 12 Volt Constant Voltage 12 Volt Constant Voltage Wiring Diagram RELATED MATERIALS APPLICATION NOTES • Ensure the mains has been disconnected from the driver for at least 1 minute before connecting to the LEDs. • Do not connect Live and Neutral to the LED output terminals. • Ensure LED QTY usage is within the recommended guidelines of the driver.

Open the catalog to page 2