DSE9470 MKII, DSE9472 MKII, DSE9476, DSE9480 MKII & DSE9481MKII INTELLIGENT BATTERY CHARGERS 5 AMP, 10 AMP & 20 AMP, 12 VOLT & 24 VOLT OPTIONS ADVANCED FEATURES • Intelligent three and four stage charging profiles • Configurable to suit 12V and 24V applications • Adjustable current limit • Can be used as a battery charger, power supply or both at the same time • Automatic or manual boost and storage charge functions to help maintain battery condition • Digital microprocessor technology • Temperature compensation for battery charging • Low output ripple and superb line regulation • Three LED indicators • Switched mode design • Fully customisable battery charging curves Full Protection • AC input under voltage • AC input over voltage • Battery charger output over voltage • Battery charger output over current • Battery under voltage alarm • Automatic battery detection • Automatic battery charger self test • Output short circuit and inversion polarity with auto recovery • Automatic power de-rating at high ambient temperatures. • Optional battery temperature compensation using PT1000 temperature sensor with over temperature protection Automatic Boost Mode • Boosts and equalises cell charge, improving battery performance and life Power Save Mode • Once the battery is fully charged, the chargers switch to eco-power to save energy Communication • Can be integrated into external systems through MODBUS RTU using RS485 • Fully configurable via DSE Configuration Suite PC Software • External remote display option -DSE2541 KEY BENEFITS • Fully flexible to maximise the life of the battery • Suitable for a wide range of battery types • Minimum 86% efficiency throughout full operating range • No external intervention for boost mode • Multiple chargers can be linked together to provide larger current output • Can be permenantly connected to battery and AC supply. No need to disconnect through high load conditions such as cranking or when the engine is running. AC SUPPLY VOLTAGE RANGE 90 V to 305 V (L to N) FREQUENCY RANGE 48 Hz to 64 Hz (L to N) DC OUTPUT DSE9470 MKII OUTPUT 10 A DC at 24 V DC DSE9472 MKII OUTPUT 5 A DC at 24 V DC DSE9476 OUTPUT 20 A DC at 24 V DC DSE9480 MKII OUTPUT 10 A DC at 12 V DC DSE9481 MKII OUTPUT 5 A DC at 12 V DC RIPPLE AND NOISE <1% EFFICIENCY >86% REGULATION LINE <0.5% LOAD 2% TEMPERATURE SENSOR INPUT PT1000 PROTECTIONS Short Circuit DC Over Voltage DC Over Current Reverse Polarity Over Temperature AC Under & Over Voltage CHARGE FAILURE RELAY 3 A at 30 V DC volt free relay DIMENSIONS OVERALL 70 mm x 200 mm x 130 mm WEIGHT 0.75 kg OPERATING TEMPERATURE RANGE -30 °C to +55 °C -22 °F to +131 °F STORAGE TEMPERATURE RANGE -30 °C to +70 °C -22 °F to +158 °F RELATED MATERIALS TITLE DSE9400 Series Configuration Suite PC Software Manual DSE Configuration Suite Installation & Operator Manual DSE9000 Series Installation Instructions DSE9476 Installation Instructions DSE9000 Series Operator Manual DEEP SEA ELECTRONICS PLC UK Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com DEEP SEA ELECTRONICS INC USA 3230 Williams Avenue, Rockford, IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL [email protected] WEBSITE www.deepseausa.com Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457

DSE9470 MKII, DSE9472 MKII, DSE9476, DSE9480 MKII & DSE9481MKII INTELLIGENT BATTERY CHARGERS 5 AMP, 10 AMP & 20 AMP, 12 VOLT & 24 VOLT OPTIONS The DSE9400 series is a range of intelligent battery chargers that can be programmed for different charging curves to maximise the life of the battery. The chargers do not include any moving parts to give added durability and reliability. They will also continue to operate during engine running. The DSE9400 series of intelligent battery chargers are programmed using the user-friendly DSE Configuration Suite PC software. The chargers can be either DIN rail...