Catalogs >
DES >
dse8700

dse8700
2Pages

Catalog excerpts

DSE8700 LOAD SHARE MODULES SERIES REAR MOUNTED ENVIRONMENTAL TESTING STANDARDS ELECTRO MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment Used in conjunction with DSE remote displays ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment The DSE8700 is an easy to use multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines. The module is available in 2 variants: • DSE8710 Auto Start (this can also be programmed as a DSE8760 Auto Mains Controller) • DSE8760 ATS/Auto Mains Controller (this can also be programmed as a DSE8710 Auto Start Controller) The modules are designed to work with independent front display screens which are connected via a data link up to a maximum distance of 1km. These must be ordered as a separate item. The DSE8700 Series monitors the system and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition. With all communication ports capable of being active at the same time, the DSE8700 Series is ideal for a wide variety of demanding load share applications. System alarms are annunciated on the independent front screens, illuminated LEDs and audible sounder. TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30oC BS EN 60068-2-2 Bb/Be Dry Heat +70oC VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn KEY LOAD SHARE FEATURES: • Peak lopping • Sequential set start • Manual voltage/frequency adjustment • R.O.C.O.F. and vector shift • Generator load demand • Automatic hours run balancing • Mains (Utility) de-coupling • Dead bus sensing • Mains (Utility) de-coupling test mode • Bus failure detection • Direct governor and AVR connections/controls • Volts and frequency matching • kW and kV Ar load sharing. The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included as well as sophisticated communication and system expansion options. Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers and alarms. HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55oC @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40oC @ 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15gn in 11mS COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF LOAD SHARE APPLICATIONS MODEM DSENET EXPANSION ANALOGUE SENDERS EMERGENCY STOP DEUTZ ISUZU PERKINS CATERPILLAR MTU VOLVO CUMMINS SCANIA VOLT FREE OUTPUTS GENERATOR SENSING CURRENT FUEL & CRANK OUTPUTS VOLTS + DC POWER DISPLAY SUPPLY 8-35V SCREENS CHARGE ALTERNATOR ELECTRONIC ENGINES MAGNETIC PICK-UP

Open the catalog to page 1

DSE8700 LOAD SHARE MODULES SERIES REAR MOUNTED Used in conjunction with DSE remote displays SPECIFICATION DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries MAXIMUM OPERATING CURRENT 460 mA at 12 V, 245 mA at 24 V MAXIMUM STANDBY CURRENT 375 mA at 12 V, 200 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V OUTPUTS OUTPUT A (FUEL ON DSE8710) 15 A DC at supply voltage DSE8721 Colour Remote Display...

Open the catalog to page 2