DSEPOWER® SHARING WITH SIMPLICITY COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF LOAD SHARE APPLICATIONS ® The DSE8700 is an easy-to-use, rear-mounted, multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and nonelectronic engines. The module is available in 3 variants: – DSE8710 Auto Start (this can also be programmed as a DSE8720 AMF or a DSE8760 Auto Mains Controller) – DSE8720 Auto Mains Failure – DSE8760 ATS/Auto Mains Controller Themodules are designed to work with independent front display screens which are connected via a data link up to a maximum distance of 1km. These must be ordered as a separate item. The DSE8700 monitors the engine and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition. Failures are annunciated on the independent front screens (multiple language options available), illuminated LEDs and audible sounder. The event logwill record 250 events to facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included as well as sophisticated communication and system expansion options. Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers and alarms. With all communication ports able to be active at the same time, the DSE8700 is ideal for a wide variety of demanding load share applications. * To follow LOADSHAREFEATURESINCLUDE: – Peak lopping – Sequential set start – Manual voltage/frequency adjustment DSE8700 REAR MOUNTED LOAD SHARE UNIT ENVIRONMENTAL TESTINGSTANDARDS ELECTROMAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30oC BS EN 60068-2-2 Bb/Be Dry Heat +70oC VIBRATION BS EN 60068-2-6 Ten sweeps in each of threemajor axes 5Hz to 8Hz@+/-7.5mm, 8Hz to 500Hz @2gn HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55oC @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40oC @ 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15gn in 11mS NEW RELEASE ISSUE 1 1ph 2ph 3ph N DSE8721 DSE871x 2 1ph 2ph 3ph N 1ph 2ph 3ph N DEUTZ ISUZU PERKINS CATERPILLAR MTU VOLVO CUMMINS SCANIA DSEPOWER® DSE8700 7 OTHER D + W/L 11 232 485 6 4 MODEM PC PC BUS SENSING VOLT FREE OUTPUTS GENERATOR SENSING CHARGE ALTERNATOR ELECTRONIC ENGINES MAGNETIC PICK-UP FUEL & CRANK OUTPUTS CURRENT VOLTS MSC 8710 8710 8760 + + DSENET® EXPANSION RS232 AND RS485 DC POWER SUPPLY 8-35V DISPLAY SCREENS USB PORT USB HOST CONFIGURABLE INPUTS DC OUTPUTS ANALOGUE SENDERS EMERGENCY STOP ETHERNET DSE2130 DSE2157 DSE2548 DSE8700 Data Sheet PRINT:Layout 1 15/6/10 12:28 Page 1

DEEP SEA ELECTRONICS PLC UK Highfield House Hunmanby Industrial Estate Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com DEEP SEA ELECTRONICS INC USA 3230 Williams Avenue Rockford IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL [email protected] WEBSITE www.deepseausa.com Registered in England & Wales No.01319649 VAT No.316923457 055-090/05/10 (1) ® DSEPOWER® SHARING WITH SIMPLICITY DSE8700 REAR MOUNTED LOAD SHARE UNIT RELATED LITERATURE PART NO DSE 8700 Installation Instructions...