DSE860/865 SINGLE-SET COMMUNICATIONS DEVICES The DSE860 and DSE865 are communications devices that allow you to monitor single or multiple generating sets over a LAN (network) or WAN (internet) connection. The devices include software that is used to assign a TCP/IP address to a COM Port on a PC. This COM port is then selected by the user in the standard PC software of the DSE module being used. Once this COM port has been selected then the user can communicate directly with the control module from their PC. KEY FEATURES • Can be used over an internal network and the internet • LED status indicators on the devices aid fault finding • TCP/IP software is extremely easy to use • Devices automatically reconnect in the event of loss of communication • Fully customer configurable settings • DIN rail mounting • Enables MODBUS RTU via a TCP connection to a PC. KEY BENEFITS • Works with the DSE73xx series and DSE335 control modules • Generic connectors for simple plug-in operation • DIN rail mounting allows devices to be installed securely within a panel • Allows users (one user at any one time) from different locations to view generator status SPECIFICATION DC SUPPLY 8 V to 35 V DC Continuous ETHERNET CONNECTION 10Base-T or 100Base-TX (IEEE 802.3). RJ45 connector COVER MATERIAL Grey/Black plastic, LEXAN 940, self extinguishing acc. To UL94-V0 MOUNTING OPTION DIN rail (EN50022) DIMENSIONS 86 mm x 35 mm x 57 mm 3.4” x 1.4” x 2.2” ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment If the device needs to be seen over the internet the assigned IP address has to be configured to be visible to the outside world. Once this has been done the module can be communicated with from any remote location that has internet connectivity. The devices have been designed to work with the DSE73xx series and DSE335 control modules. TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30 oC BS EN 60068-2-2 Bb/Be Dry Heat +70 oC VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 oC @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 oC @ 93% RH 48 Hours The devices also include LED indicators that show the operation and connection status at all times. Different light patterns indicate a range of status conditions. SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS RELATED MATERIALS TITLE DSE860 & DSE865 Manual DSE7310/20 Data Sheet DSE335 Data Sheet DEEP SEA ELECTRONICS PLC UK Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com DEEP SEA ELECTRONICS INC USA 3230 Williams Avenue, Rockford, IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL [email protected] WEBSITE www.deepseausa.com Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457