Catalogs >
DES >
dse7310/20 MKII

dse7310/20 MKII
2Pages

Catalog excerpts

ENVIRONMENTAL TESTING STANDARDS AUTO START & AUTO MAINS FAILURE CONTROL MODULES ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment The DSE7310 MKII is an Auto Start Control Module and the DSE7320 MKII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. The DSE7320 MKII will also monitor the mains (utility) supply. The modules include USB, RS232 and RS485 ports as well as dedicated DSENet® terminals for system expansion. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem). Both modules are compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offer an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements. The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality. Dual mutual standby is now available on both the DSE7310 MKII & DSE7320 MKII using RS232 or RS485 communications. This provides for a simpler and more convenient installation with more advanced features such as true engine hours balancing. The modules can be easily configured using the DSE Configuration Suite PC software. Selected front panel editing is also available. TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30 oC BS EN 60068-2-2 Bb/Be Dry Heat +70 oC VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz at +/-7.5 mm, 8 Hz to 500 Hz at 2 gn HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 oC at 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 oC at 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP65 - Front of module when installed into the control panel with the supplied sealing gasket. COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF GEN-SET APPLICATIONS MODEM MODBUS DSENET® EXPANSION CONFIGURABLE INPUTS ANALOGUE INPUT EMERGENCY STOP + DEUTZ ISUZU PERKINS CATERPILLAR MTU VOLVO CUMMINS SCANIA MAINS (UTILITY) SENSING DSE7320 MKII ONLY N/C VOLT FREE OUTPUT GENERATOR / LOAD CURRENT N/O VOLT FREE OUTPUT GENERATOR SENSING CHARGE ALTERNATOR FUEL & CRANK OUTPUTS (Flexible with CAN) ELECTRONIC ENGINES & MAGNETIC PICK-UP

Open the catalog to page 1

dseGenset SPECIFICATION dse7310/20 MKII AUTO START & AUTO MAINS FAILURE CONTROL MODULES FEATURES DSE7320 MKII DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous 5 V for upto 1 minute CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 510 mA at 12 V, 240 mA at 24 V MAXIMUM STANDBY CURRENT 330 mA at 12 V, 160 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V...

Open the catalog to page 2