Catalogs >
DES >
DSE7110 MKII

DSE7110 MKII
2Pages

Catalog excerpts

ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment AUTO START & AUTO MAINS FAILURE CONTROL MODULES FEATURES ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment The DSE7110 MKll Auto Start Control Module and the DSE7120 MKll Auto Mains (Utility) Failure Control Module are suitable for a wide variety of single gen-set applications. Monitoring engine speed, oil pressure, coolant temperature, frequency, voltage, current, power and fuel level, the modules will give comprehensive engine and alternator protection. This will be indicated on a large back-lit LCD icon display via an array of warning, electrical trip and shutdown alarms. Electronic J1939 (CAN) and nonelectronic MPU and alternator sensing engine support for diesel, gas and petrol engines all in one variant. With a number of flexible inputs, outputs and protections, the modules can be easily adapted to suit a wide range of applications. Compehensive power metering for both generator and load is available (kW, kV A, kV Ar, pf). A real time clock allows scheduling while a 50 event log provides extensive event interrogation. Through USB Communication both modules can be easily configured using the DSE Configuration Suite PC Software or can be fully configured through the module's front panel editor. All DSE products are supported by the DSE global technical support team which gives our customers and end users access to 24 hour system help and advice. OPERATING TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30 oC BS EN 60068-2-2 Bb/Be Dry Heat +70 oC VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 oC @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 oC @ 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP65 - Front of module when installed into the control panel with the supplied sealing gasket. COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF GEN-SET APPLICATIONS PC 6 CONFIGURABLE INPUTS ANALOGUE SENDERS / DIGITAL INPUT EMERGENCY STOP + DEUTZ ISUZU PERKINS CATERPILLAR MTU VOLVO CUMMINS SCANIA MAINS (UTILITY) SENSING (DSE7120 MKlI) N/C VOLT FREE OUTPUT GENERATOR / LOAD CURRENT N/O VOLT FREE OUTPUT GENERATOR SENSING CHARGE ALTERNATOR FUEL & START OUTPUTS (Flexible with CAN) ELECTRONIC ENGINES & MAGNETIC PICK-UP

Open the catalog to page 1

AUTO START & AUTO MAINS FAILURE CONTROL MODULES FEATURES DSE7120 MKll DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 290 mA at 12 V, 140 mA at 24 V MAXIMUM STANDBY CURRENT 75 mA at 12 V, 40 mA at 24 V CHARGE FAIL/EXCITATION RANGE 0 V to 35 V GENERATOR & MAINS (UTILITY) VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 26 V...

Open the catalog to page 2