® DSEULTRA® STARTING WITH QUALITY. SPECIFICATION ENVIRONMENTAL TESTING STANDARDS The DSE710 is an Automatic Start ControlModule that offers an advanced range of engine monitoring and protection features. The module has been designed tomonitor generator frequency, generator volts, generator current, engine oil pressure, engine coolant temperature, engine running hours and battery volts. The module also displays the engine speed.When the module detects a fault condition it automatically shuts down the engine and indicates the exact fault on the modules LCD display or relevant LED indicator. The module can be configured using the front panel or via the DSE810 interface and a PC. The module can also be controlled from a PC that is located up to 100meters away. The DSE720 is an Automatic Mains Failure ControlModule and incorporates all the features of the DSE710 plus the ability to automaticallymonitor the mains supply and switch over to the generator when the mains power fails. FEATURES • PC configurable • Digital and analogue inputs • Digital outputs • Automatic mains (utility) supply monitoring (DSE720 only) • Automatic shutdown or warning when fault conditions are detected • Manual start • Engine pre-heat • Engine monitoring and protection features • Protected Solid State (PSS) outputs • Front panel mounting • Front panel programming • Tamper proof engine hours counter • Remote start • LED indicators • Configurable timers • Configurable outputs • Configurable inputs • Back-lit character/icon LCD display BENEFITS • Transfer between mains (utility) and generator power (DSE720 only) • On-site module configuration and remote configuration (Max 100 Meters) using PC software • User-friendly set-up and button layout • Multiple engine parameters are monitored simultaneously • License free PC software OPERATION The module is operated using the front STOP/RESET, MANUAL, AUTO, TEST and START push buttons. An additional push button next to the LCD display is used to scroll through the modules’ metering displays. CONFIGURATION The modules can be configured using the front panel or remotely using the DSE810 interface and a PC. As well as configuration the DSE810 interface has the ability to provide real time diagnostic facilities. ELECTROMAGNETIC CAPABILITY BS EN 61000-6-2 EMC Generic Emission Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment TEMPERATURE BS EN 60068-2-2 Test Ab to +70oC 60067-2-2 Hot Test Ab to -30oC 60068-2-1 Cold VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn HUMIDITY BS 2011 part 2.1 60068-2-30 Test Cb Ob Cyclic 93% RH @ 40oC for 48 hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15gn in 11mS DC SUPPLY 8V to 35V continuous CRANKING DROPOUTS Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries. MAXIMUMOPERATING CURRENT 180mA at 12V. 190mA at 24V MAXIMUMSTANDBY CURRENT 145mA at 12V. 150mA at 24V GENERATOR INPUT RANGE 35V(L-N) to 333V AC (L-N) absolute maximum 50Hz - 60Hz (min 15V AC) AUXILIARY OUTPUTS Solid state 2.4A DC at supply voltage FUEL/START OUTPUTS Solid state 3.4A DC at supply voltage GENERATOR C.T. 5A secondary 0.5VA MAINS (UTILITY) SENSING INPUT RANGE(DSE720 only) 35V(L-N) to 333V AC (L-N) 50Hz - 60Hz (min 15V AC) DSE710 & DSE720 DIMENSIONS 209mm x 146mm x 30.3mm 8.2” x 5.7” x 1.2” DSE710 & DSE720 PANEL CUTOUT: 182mm x 137mm 7.2” x 5.4” MAXIMUMPANEL THICKNESS 8mm 0.3” DSE710 & DSE720 AUTO START & AUTOMAINS FAILURE CONTROLMODULES DSE710 DSE720

® DSE710 & DSE720 RELATEDMATERIALS TITLE PART NO’S DSE710 Manual 053-013 DSE720 Manual 053-005 DSE7xx Software Manual 057-002 DEEP SEA ELECTRONICS INC 3230 Williams Avenue Rockford IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL [email protected] WEBSITE www.deepseausa.com DEEP SEA ELECTRONICS PLC Highfield House Hunmanby Industrial Estate Hunmanby, North Yorkshire YO14 0PH England TELEPHONE +44 (0)1723 890099 FACSIMILE +44 (0)1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com Registered in England & Wales No.01319649 VAT No.316923457 DEEP SEA...