® DSEULTRA® STARTING WITH QUALITY. SPECIFICATION ENVIRONMENTAL TESTING STANDARDS The DSE701 is available in Manual and Auto Start versions, offering an excellent range of engine monitoring and protection features. The module has been designed to monitor low oil pressure, high engine temperature, overspeed and a user-defined auxiliary input (manual start only).When the module detects a fault it will automatically shut down the engine. The module also has the capability tomonitor battery charging by utilising theWL terminal on the charge alternator. On detecting a fault, it will light the warning LED on the front panel. The DSE702 is available in Manual and Auto Start versions including all the features of the DSE701 plus a tamper proof engine hours counter. Auto start versions include an option for remote start signal input. This input allows the module to be started from a remote location. Both modules are available with or without key start operation (please specify ‘key’ or ‘NK’ on ordering). FEATURES • Manual start or remote Start • Engine pre-heat • Engine monitoring and protection features • Protected solid state (PSS) outputs • Front panel mounting • Tamper proof engine hours counter (702 only) • LED indicators BENEFITS • Hours counter provides accurate information for monitoring maintenance and warranty periods (702 only) • Multiple engine parameters are monitored simultaneously OPERATION MANUALMODE • The module is started using the on-board key/buttons • The user turns the key to the position • The engine pre-heat button is then pressed for the required time • The start button is then pressed to start the engine • To stop the engine the key needs to be turned to the off position AUTOMATICMODE Auto Start versions • The key needs to be permanently left in the position • The module is powered up by the remote start signal • The pre-heat function is automatically carried out and then the engine is started • To stop the engine the remote switch is turned to the ‘off’ position OVERSPEED PROTECTION The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively). ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment ELECTROMAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment TEMPERATURE (OPERATING) BS EN 60068 Test Ab to +70oC 60068-2-2 Hot Test Ab to -30oC 60068-2-1 Cold VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn HUMIDITY BS 2011 part 2.1 60068-2-30 Test Cb Ob Cyclic 93% RH @ 40oC for 48 hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15gn in 11mS IP RATING BS EN 60529 Degrees of protection provided by enclosures • IP65 NK version only • IP41 With Key version only Applies to Front of module when installed into the control panel with the supplied sealing gasket. DC SUPPLY 8V to 35V continuous CRANKING DROPOUTS Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries. ALTERNATOR INPUT FREQUENCY 50Hz – 60Hz at rated engine speed (minimum:15V Overspeed: nominal frequency +14% (+24% overshoot) ALTERNATOR INPUT RANGE 15V-305V AC RMS (+20%) START OUTPUT Solid state 1.2A negative grounding terminal RUN OUTPUT Solid state 1.2A negative grounding terminal PRE-HEAT OUTPUT Solid state 1.2A negative grounding terminal DSE701 DIMENSIONS 72mm x 72mm x 38mm 2.8” x 2.8” x 1.5” Excludes key switch DSE701 PANEL CUT OUT 68mm x 68mm 2.7” x 2.7” DSE702 DIMENSIONS 84mm x 72mm x 34.9mm 3.3” x 2.8” x 1.4” Excludes key switch DSE702 PANEL CUT OUT 80mm x 68mm 3.1” x 2.7” DSE701 & DSE702 AUTO &MANUAL START CONTROLMODULES DSE701 DSE702

® RELATEDMATERIALS TITLE PART NO’S DSE701/702NK Installation Instructions 053-002 DSE701/702K Installation Instructions 053-003 DSE701/702 Manual Key Installation Instructions 053-016 DEEP SEA ELECTRONICS INC 3230 Williams Avenue Rockford IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL [email protected] WEBSITE www.deepseausa.com DEEP SEA ELECTRONICS PLC Highfield House Hunmanby Industrial Estate Hunmanby, North Yorkshire YO14 0PH England TELEPHONE +44 (0)1723 890099 FACSIMILE +44 (0)1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com Registered...