ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment AUTO START AND AUTO MAINS FAILURE CONTROL MODULES FEATURES The DSE6110 MKII Auto Start Control Module and the DSE6120 MKII Auto Mains (Utility) Failure Control Module are suitable for a wide variety of single gen-set applications. Monitoring engine speed, oil pressure, coolant temperature, frequency, voltage, current, power and fuel level, the modules give comprehensive engine and alternator protection. This is indicated on a large back-lit LCD text display via an array of warning, electrical trip and shutdown alarms in multiple languages. ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment Electronic J1939 (CAN) and nonelectronic MPU and alternator sensing engine support for diesel, gas and petrol engines all in one variant. With a number of flexible inputs, outputs and protections, the modules can be easily adapted to suit a wide range of applications. Using the DSE Configuration Suite PC Software the controller is easy to use and configure which allows alteration of operating parameters, sequences, timers and alarms. AVAILABLE VARIANTS Auto Start with real time clock Auto start with real time clock and heated display Auto Mains Failure with real time clock Through USB Communication both modules can be configured using the DSE Configuration Suite PC Software or through the module's front panel editor. Auto Mains Failure with real time clock and heated display TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30 oC BS EN 60068-2-2 Bb/Be Dry Heat +70 oC VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz at +/-7.5 mm, 8 Hz to 500 Hz at 2 GN HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 oC at 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 oC at 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 GN in 11 mS DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP65 - Front of module when installed into the control panel with the optional sealing gasket. COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF GEN-SET APPLICATIONS PC DSENet® EXPANSION CONFIGURABLE INPUTS ANALOGUE SENSOR / DIGITAL INPUT EMERGENCY STOP MAINS (UTILITY) SENSING (DSE6120 MKII) GENERATOR / LOAD CURRENT GENERATOR SENSING CHARGE ALTERNATOR FUEL & START OUTPUTS (Flexible with CAN) ELECTRONIC ENGINES & MAGNETIC PICK-UP

AUTO START AND AUTO MAINS FAILURE CONTROL MODULES FEATURES DSE6120 MKII DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 100 mA at 12 V, 105 mA at 24 V MAXIMUM STANDBY CURRENT 60 mA at 12 V, 55 mA at 24 V MAXIMUM SLEEP CURRENT 40 mA at 12 V, 35 mA at 24 V GENERATOR & MAINS (UTILITY) VOLTAGE RANGE 15 V to 415 V AC (Ph...