AUTO START AND AUTO MAINS FAILURE CONTROL MODULES (ALTERNATOR FREQUENCY & CAN SPEED SENSING) DSE4520 MKII DC SUPPLY CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 85 mA at 12 V, 96 mA at 24 V MAXIMUM STANDBY CURRENT 51 mA at 12 V, 47 mA at 24 V MAXIMUM SLEEP CURRENT 35 mA at 12 V, 32 mA at 24 V MAXIMUM DEEP SLEEP CURRENT <10 uA at 12 V, <10 uA at 24 V MAINS (UTILITY) DSE4520 MKII ONLY VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz OUTPUTS OUTPUT A (FUEL) 10 A short term, 5 A continuous, at supply voltage KEY FEATURES • Auto Start and AMF mode in one module (DSE4520 MKII only) • J1939-75 support and CAN alarm ignore functon • Alternator frequency & CAN speed sensing in one variant • Largest back-lit icon display in its class • Heated display option • Real time clock provides accurate event logging • Fully configurable via the fascia or PC using USB communication • Extremely efficient power save mode • 3 phase generator sensing • 3 phase mains (utility) sensing (DSE4520 MKII only) • Compatible with 600 V ph to ph nominal systems • Generator/load power monitoring (kW, kV A, kV Ar, pf) • Accumulated power monitoring (kW h, kVA h, kVAr h) • Generator overload protection (kW) • Generator/load current monitoring and protection • Fuel and start outputs (configurable when using CAN) • 4 configurable DC outputs • 3 configurable analogue/digital inputs • 4 configurable digital inputs • Configurable staged loading outputs • 3 engine maintainance alarms • Engine speed protection • Engine hours counter • Engine pre-heat • Engine run-time scheduler • Engine idle control for starting & stopping • Tier 4 engine instrumentation screens • Battery voltage monitoring • Start on low battery voltage • Configurable remote start input • 1 alternative configuration • Comprehensive warning, electrical trip or shutdown protection upon fault condition • LCD alarm indication • Event log (50) KEY BENEFITS • Ultimate size to feature ratio • Automatically transfers between mains (utility) and generator (DSE4520 MKII only) • Hours counter provides accurate information for monitoring and maintenance periods • User-friendly set-up and button layout for ease of use • Multiple parameters are monitored simultaneously which are clearly displayed on the largest back-lit icon display in its class • The module can be configured to suit a wide range of applications • Uses DSE Configuration Suite PC Software for simplified configuration • Compatible with a wide range of CAN engines including Tier 4 • Licence-free PC software • IP65 rating (with optional gasket) offers increased resistance to water ingress OUTPUT B (START) 10 A short term, 5 A continuous, at supply voltage AUXILIARY OUTPUTS C, D, E & F 2 A DC at supply voltage ­­­­ ­ GENERATOR VOLTAGE RANGE 15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) FREQUENCY RANGE 3.5 Hz to 75 Hz DIMENSIONS OVERALL 140 mm x 113 mm x 43 mm 5.5’’ x 4.4” x 1.7” PANEL CUT-OUT 118 mm x 92 mm 4.6’’ x 3.6” MAXIMUM PANEL THICKNESS 8 mm 0.3” STORAGE TEMPERATURE RANGE -40 °C to +85 °C -40 °F to +185 °F OPERATING TEMPERATURE RANGE -30 °C to +70 °C -22 °F to +158 °F -40 °C to +70 °C (for heated display variant) -40 °F to +158 °F (for heated display variant) OPTIONAL PARTS PART IP65 Gasket RELATED MATERIALS TITLE PART NO. DSE4510/20 MKII Installation Instructions 053-190 DSE4510/20 MKII Operator Manual 057-260 DSE4510/20 MKII Configuration Suite PC Manual 057-258 DEEP SEA ELECTRONICS PLC UK Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com DEEP SEA ELECTRONICS INC USA 3230 Williams Avenue, Rockford, IL 61101-2668 USA TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL [email protected] WEBSITE www.deepseausa.com Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without

ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment AUTO START AND AUTO MAINS FAILURE CONTROL MODULES (ALTERNATOR FREQUENCY & CAN SPEED SENSING) The DSE4510 MKII Auto Start Control Module and the DSE4520 MKII Auto Mains (Utility) Failure Control Module are suitable for a wide variety of single gen-set applications. Whilst maintaining functions included within higher end controllers, such as generator or load power monitoring, the...