Catalogs >
DEPRAG SCHULZ GMBH u. CO. >
Stationary SENSOMAT Screwdriver Spindles

Stationary SENSOMAT Screwdriver Spindles
8Pages

Catalog excerpts

Stationary SENSOMAT Screwdriver Spindles - 1

Screwdriving Technology Automation Air Motors Air Tools machines unlimited SENSOMAT The Screwdriver with regulated clutch function Seating torque from 0.3 – 5 Nm (3 – 44 in.lbs) nn Thread forming with maximum motor power nn Seating torque less than driving torque nn Thread forming instead of thread damaging nn Simple integration nn Smallest mounting dimensions Our pneumatic screwdriver spindles SENSOMAT with mechanical clutch function are particularly suitable for applications such as: • Sheet metal assemblies • Wood assemblies • Self-tapping through bolts Screwdriver Spindles pneumatic The SENSOMAT has been specially designed for screw joints where the screwdriving torque (forming torque) is close to or even higher than the shut-off torque due to high friction during assembly. In this way for example thread forming or thread cutting screws can be reliably processed with this screwdriver which is equipped with a mechanical clutch lock – there is no chance of damaging the screw by over-tightening.

Open the catalog to page 1

Stationary SENSOMAT Screwdriver Spindles - 2

Sensomat driving torque > seating torque (thread forming screw) The SENSOMAT control screwdriver tightens the screw with full motor torque. Just before the base of the screw head is seated, the shut-off clutch is released and the screwdriver switches off exactly at the preset torque. The screw is completely screwed in without damaging the screw connection. The SENSOMAT, a further development of the well-known MINIMAT screwdrivers achieves high torque accuracy and <3% standard deviation with the help of the highly accurate shut-off clutch. When used under the correct conditions DEPRAG...

Open the catalog to page 2

Stationary SENSOMAT Screwdriver Spindles - 3

dimension sheet Motor Size 2 Spindle right-rotation / right shut-off female hex. drive F6.3 (1/4") DIN ISO 1173 with quick change chuck A = air supply for push-to-start B = air supply for start by remote valve Motor Size 2 Dimensions (mm) Type Spindle right rotation / right shut-off

Open the catalog to page 3

Stationary SENSOMAT Screwdriver Spindles - 4

Performance data relate to an air pressure of 6.3 bar (90 PSI) Set of coupler and connector plug • Set of torque adjustment tools • Set of clutch springs

Open the catalog to page 4

Stationary SENSOMAT Screwdriver Spindles - 5

dimension sheet Motor Size 3 Spindle right-rotation / right shut-off female hex. drive F6.3 (1/4") DIN ISO 1173 with quick change chuck Motor Size 3 Dimensions (mm) Type Spindle right rotation / right shut-off

Open the catalog to page 5

Stationary SENSOMAT Screwdriver Spindles - 6

1 for corresponding exhaust filter/silencer (see leaflet D 3340 E) Depth control

Open the catalog to page 6

Stationary SENSOMAT Screwdriver Spindles - 7

Function Description Driver-Start Push To Start Driver with one way rotation, right rotation and right shut-off Remote Start (3/2-way valve) Driver with one way rotation, right rotation and right shut-off * During drive cycle the Function Control Line is under pressure (approx. 2 bar).

Open the catalog to page 7

Stationary SENSOMAT Screwdriver Spindles - 8

P.O. Box 1352, D-92203 Amberg, Germany Carl-Schulz-Platz 1, D-92224 Amberg Phone (+49) 9621 371-0, Fax (+49) 9621 371-120 www.deprag.com info@deprag.de © DEPRAG. All rights and technical alterations reserved – Fri DEPRAG SCHULZ GMBH u. CO.

Open the catalog to page 8

Stationary SENSOMAT Screwdriver Spindles 8Pages

Catalog excerpts

All DEPRAG SCHULZ GMBH u. CO. catalogs and technical brochures

Stationary SENSOMAT Screwdriver Spindles
8Pages