MINIMAT Screwdrivers angle head design
6Pages

{{requestButtons}}

Catalog excerpts

MINIMAT Screwdrivers angle head design - 1

| Screwdriving Technology ^P^^A I VP^B^ ^^B^H V^H The basic solution for almost all screwdriving tasks angle head design - torque from 0.3 - 65 Nm / 3 to 575 in.lbs The particular strength of the MINIMAT screwdriver in angle head design is that it can carry out screw assemblies with torque ranges from 0.3 Nm to 65 Nm. In these ranges you can not only assemble screws but also adjust them. Screwdrivers with angle head design are preferably used for assemblies in tight areas. Because of the angle head design even large torque values can be managed by hand without problems. The handle is linked with the angle head by a plug connection and can be arrested in different positions. Handheld Screwdriver pneumati The ergonomic MINIMAT screwdriver is extremely durable due to its extra- ordinary processing quality and design for heavy industrial use. The MINIMAT clutch works with the tried and tested principle of a mechanical separation and shut-off clutch. This highly precise shut-off clutch allows torque preci-sion of < ±3% standard deviation, which is maintained for millions of assemblies. When used under the correct condi- tions DEPRAG pneumatic screwdriv- ers with shut-off clutch conform with a Cmk value of >1.67 with a tolerance In other words a Cmk value of 1.67 means that there is a failure rate of 0.6 per million screw assemblies.

Open the catalog to page 1
MINIMAT Screwdrivers angle head design - 2

version - F drive hex. female with quick change chuck - F 6.3 version - D or SW drive hex. female non-magnetic - D 6.3 integrated socket with hex. female drive - SW version drive square male - E 6.3 version – FH drive hex. female with quick change chuck, spring-sleeve and vacuum - F 6.3 version - DM drive hex. female with magnet - D 6.3 version drive square male - E 10 *) Measurement plus length of bit or sockets is space requirement. Technical Data Screwdriver Style Driver reversible, right shut-off drive square male 1/4” Driver reversible, right shut-off drive square male 3/8” Driver...

Open the catalog to page 2
MINIMAT Screwdrivers angle head design - 3

version - F drive hex. female with quick change chuck - F 6.3 version – FH drive hex. female with quick change chuck, spring-sleeve and vacuum - F 6.3 version - D or SW drive hex. female non-magnetic - D 6.3 integrated socket with hex. female drive - SW version drive square male - E 6.3 version - DM drive hex. female with magnet - D 6.3 version drive square male - E 10 *) Measurement plus length of bit or sockets is space requirement. Technical Data Screwdriver Style Driver reversible, right shut-off drive square male 1/4” Driver reversible, right shut-off drive square male 3/8” Driver...

Open the catalog to page 3
MINIMAT Screwdrivers angle head design - 4

version drive square male E 12.5 (1/2”) version drive square male E10 (3/8”) *) Measurement plus length of bit or sockets is space requirement. version drive square male E10 (3/8”) Technical Data Screwdriver Style Driver reversible, right shut-off drive square male E12.5 (1/2”) Screws Torque min. Torque max. Speed, idling Air consumption Length (L) Weight Noise level Air hose dia. Air inlet pipe thread size Driver reversible, right shut-off drive square male E10 (3/8”) Screws Torque min. Torque max. Speed, idling Air consumption Length (L) Weight Noise level Air hose dia. Air inlet pipe...

Open the catalog to page 4
MINIMAT Screwdrivers angle head design - 5

version drive square male E 12.5 (1/2”) version drive square male E 10 (3/8”) *) Measurements plus length of bit or sockets in space requirement Technical Data Screwdriver Style Driver reversible, right shut-off drive square male E12.5 (1/2”) Screws Torque min. Torque max. Speed, idling Air consumption Length (L) Weight Noise level Air hose dia. Air inlet pipe thread size Driver reversible, right shut-off drive square male E10 (3/8”) Screws Torque min. Torque max. Speed, idling Air consumption Length (L) Weight Noise level Air hose dia. Air inlet pipe thread size Type Part no. up to Nm /...

Open the catalog to page 5
MINIMAT Screwdrivers angle head design - 6

P.O. Box 1352, D-92203 Amberg, Germany Carl-Schulz-Platz 1, D-92224 Amberg Phone (+49) 9621 371-0, Fax (+49) 9621 371-120 www.deprag.com info@deprag.de © DEPRAG. All rights and technical alterations reserved - Fri DEPRAG SCHULZ GMBH u. CO.

Open the catalog to page 6

All DEPRAG SCHULZ GMBH u. CO. catalogs and technical brochures

  1. MINIMAT-EC

    12 Pages

  2. E-SFM

    8 Pages

  3. Air Motors

    28 Pages

  4. Services

    12 Pages

  5. D6100

    8 Pages

  6. ADVANCED LINE

    40 Pages

  7. D 3550

    2 Pages

  8. D C A M

    4 Pages

  9. MINIMAT-E

    8 Pages

  10. D 6600

    48 Pages

  11. SENSOMAT

    4 Pages

  12. BASIC LINE

    8 Pages

  13. VARIOMAT

    2 Pages

  14. D 3460

    4 Pages

  15. D 3470

    2 Pages

  16. D 3520

    2 Pages

  17. D 3530

    2 Pages

  18. NANOMAT

    2 Pages