Electric Screwdrivers equipped with a mechanical shut-off-clutch
4Pages

{{requestButtons}}

Catalog excerpts

Electric Screwdrivers equipped with a mechanical shut-off-clutch - 1

Screwdriving Technology Automation Air Motors Air Tools machines unlimited Electric Screwdrivers equipped with a mechanical shut-off-clutch ideal for basic applications in environments without compressed air n economical n air independent The cost-effective electric screwdriver with mechanical shut-off clutch is a good alternative if no pneumatic connection is available. Our range of handheld electric screwdrivers provides the customer with the famili-ar quality features of DEPRAG screwdriving systems. This ergonomic screwdriver is available with varying functions such as e.g. push-to-start or lever start. For all screwdriver types speed regulation is possible. Seven performance classes cover the application areas for precision engineering screw assemblies up to M6 or 12 Nm. The torque set on the mechanical shut-off clutch has an accuracy of ±3% standard deviation. The separate electricity supply of 32 V and 40 V extra-low voltage ensures safe usage. Our standard program for inserting tools is applicable. handheld Screwdriver electric 342EGT-0003 with screwdriver cable

Open the catalog to page 1
Electric Screwdrivers equipped with a mechanical shut-off-clutch - 2

Power range ESD capability The screwdriver is equipped with a brushless drive motor with low voltage supply. The high degree of efficiency of the EC motor results in a larger torque and speed range in a lower weight and smaller diameter screwdriver. Throughout the four sizes, shut-off torque can be set from 0.04 to 12 Nm. The high speeds of up to 1000 rpm guarantee short screw cycle times. Under suitable processing conditions Cmk-values of >1.67 are reached with a tolerance of ±10%. All screwdrivers fulfil the requirements for the processing of ESD-sensitive components. The power units have...

Open the catalog to page 2
Electric Screwdrivers equipped with a mechanical shut-off-clutch - 3

Screwdriver adaptor for torque support with linear stand or parallelogram stand. Slow-Start Module -* enables a screwdriving step with low speed before screwdriving to torque ^ soft start to ensure proper bit engagement -► duration and speed of the steps can be adjusted ^ module type PK - can be used in conjunction with control the process - signals for „direction of rotation11 and “external start release” Handle Type HG4-EGA/EGT can be optionally used with screwdriver type 342EGT/EGA-0088. Torque setting tool ^ for torque setting without disassembly of the protective sleeve ^ when frequent...

Open the catalog to page 3
Electric Screwdrivers equipped with a mechanical shut-off-clutch - 4

P.O. Box 1352, D-92203 Amberg, Germany Carl-Schulz-Platz 1, D-92224 Amberg Phone (+49) 9621 371-0, Fax (+49) 9621 371-120 www.deprag.com info@deprag.de © DEPRAG. All rights and technical alterations reserved – Fri DEPRAG SCHULZ GMBH u. CO.

Open the catalog to page 4

All DEPRAG SCHULZ GMBH u. CO. catalogs and technical brochures

  1. D 3550

    2 Pages

  2. Total Program

    32 Pages

  3. ADVANCED LINE

    40 Pages

  4. MINIMAT-EC

    12 Pages

  5. Air Motors

    28 Pages

  6. D C A M

    4 Pages

  7. MINIMAT-E

    8 Pages

  8. D 6600

    48 Pages

  9. Services

    12 Pages

  10. SENSOMAT

    4 Pages

  11. BASIC LINE

    8 Pages

  12. VARIOMAT

    2 Pages

  13. D 3460

    4 Pages

  14. D 3470

    2 Pages

  15. D 3520

    2 Pages

  16. D 3530

    2 Pages

  17. NANOMAT

    2 Pages