Catalogs >
DEPRAG SCHULZ GMBH u. CO. KG >
VARIOMAT, Drilling Machine and Screwdriver in one Tool

VARIOMAT, Drilling Machine and Screwdriver in one Tool
2Pages

Catalog excerpts

VARIOMAT, Drilling Machine and Screwdriver in one Tool - 1

Handheld Screwdriver pneumatic for special applications nn Perfectly balanced and ergonomic handle nn For a wide range of applications nn High speeds nn High torque output VARIOMAT, Drilling Machine and Screwdriver in one Tool Versatile for the Wood Industry The flexible VARIOMAT Screwdriver, which was specially designed for the industries of wood processing, permits the use in many different application varieties: this tool is able to drill holes and also to assemble screws. By using suitable accessories a full range of applications can be handled with just one tool - no matter if the tool is used for screwdriving or for drilling! The ergonomic shape of the handle allows a good grip and assures a fatigue-proof effort over long time periods. The speed of 2,000 rpm assures the efficient and economical operation of this All-Rounder for any wood processing. Screwdriving with the VARIOMAT: Screwdriving into hardwood up to a screw shaft-diameter of 4-mm and into softwood up to a diameter of 5-mm, are the strong points of the VARIOMAT. We offer several different design variations of the flexible pistolgrip screwdriver: • VARIOMAT with shut-off clutch: Fulfills the high accuracy demands. Screwdriver will torque out and shut off automatically after reaching the pre-set torque. • VARIOMAT with slip clutch: As soon as the preset torque is reached, the slip-clutch activates. For assemblies such as hinges on windows. • VARIOMAT with adapter: The cost-effective direct-drive solution without shut-off, simplify different tasks such as the clamping of bits. Drilling with the VARIOMAT: The VARIOMAT is designed for the drilling into wood up to 10-mm. We offer keyless drill chuck or standard drill chuck as suitable accessories.

Open the catalog to page 1

VARIOMAT, Drilling Machine and Screwdriver in one Tool - 2

Type Part no. rpm Nm/in.lbs m3/min/cfm kg/lbs mm/in. W dB (A) VARIOMAT (basic model) Speed (idling) Stall torque max. Air consumption Weight Hose I.D. Power Noise level Connector thread for air hose Technical Data Optional Equipment Drill chuck 828633 Drill chuck (chucking range 0.8 - 10 mm) Quick-change chuck (chucking range up to 13 mm) 49.5 Quick-change chuck 829257 69.5 Adaptor 394865 A Shut-off clutch cpl. 401375 C Internal hex. drive DIN ISO 1173 - F6.3 127.65 Internal hex. drive Shut-off DIN clutch ISOcpl. 1173 - F6.3 401375 C with quick-change chuck 127.65 Performance data relate to...

Open the catalog to page 2