Straight Drills
6Pages

Catalog excerpts

Screwdriving Technology ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions Our line of drills are especially robust air tools for the drilling of different materials. These drills are used for the construction in the aviationand automotive industry, as well as for the machine building industry. Our straight drills are best used in hard-to-reach areas and for vertical applications. The drill Model DS 012-005PC is well suited for deburring of holes up to 15-mm diameter, when used with commonly available burrs (90°).

Open the catalog to page 1

Small, ergonomic drills for industrial applications - especialy for vertical drill operations Ergonomic The low-vibration operation, powerful motor and the ergonomic grip assure a fatique-free operation. Optimum power-to-weight ratio The innovative motor design - in connection with the efficient gearbox - allows an optimum power-to-weight ratio. Simple operation Simple operation for a multitude of applications and different drilling processes. Inline drills are designed for the use in a vertical plane. A drill chuck allows the simple exchange of the drill bits. High variability It is...

Open the catalog to page 2

SPECIFICATIONS - Drill with Collet (Deburrer) - Power Output: 120 W (.16 HP) Drill with collet - for vertical applications, deburring of holes up to 15-mm diameter, to be used with commonly available burrs (90°) Support ring, Part No. 389775C Drill with Collet (Deburrer) Max. power output Speed (no load) Speed (max. power) Rated torque Rotation I.D. of air inlet hose Chuck range Max. Ø of deburring Weight Air connection Exhaust hose, Part No. 389653A Spindle-lock → for the simple locking and loosening of the drill bit Standard Equipment: Part Number Collet Ø 8 mm Spanner 12 mm Quick release...

Open the catalog to page 3

SPECIFICATIONS - Drills with Chuck - Power Output: 290 W (.39 HP) • Safety lever • Drill capacity to 8 mm • For vertical applications • With a gear that allows the perfect operating speed for excellent drilling results Drills with Chuck Drilling into steel to Drilling into alu to Range - Bohrfutter - Quick change chuck Tapered chuck DIN 238 Speed (no load) Max. power output Air consumption Rotation Length L1 Length L2 Diameter D1 Diameter D2 Diameter D3 Weight I.D. of air inlet hose Air connection Standard Equipment: Quick release coupling Nipple Drill chuck Drill chuck quarding Optional...

Open the catalog to page 4

RECOMMENDED VALUES OF SPEED (RPM) FOR HSS-DRILL BITS Cutting speed Drill bit [mm] Pain carbon steel up to 500 N/mm2 Alloyed steel 7 m/min Stainless steel Copper, bronze, brass Light weight metal tough screw brass 1) 1) This speed also applies when drilling thermo-setting materials, hardened paper and hardened textiles, but only when using K10 steel drill-bits instead of HSS bits 2) Please double these values when drilling into thermo-plastic materials.

Open the catalog to page 5

DEPRAG CZ a.s., T. G. Masaryka 113, 507 81 Lázně Bělohrad - Czech Republic Tel.: +420-493 771 511, Fax: +420-493 771 623, E-mail: sales@deprag.cz, Internet: www.deprag.cz Specifications subject to change without prior notice machines unlimited

Open the catalog to page 6