Feeding Technology Storage Devices Belt-Driven Hopper for the automatic refilling of feeding systems nn extends refill intervals nn provides a consistent fill-volume nn gentle part handling nn flexible nn low noise level and wear-resistant nn easy to control Does your operating staff have to refill your feeding equipment to avoid a production stoppage? Or, does your feeder operate irregularly and would you like to optimize its process? For those situations, we recommend the use of our storage devices, such as the DEPRAG Belt-Driven Hopper.

ADVANTAGES OF THE DEPRAG STORAGE DEVICES • Extends Refill Intervals Belt-driven hoppers are the ideal supplement to feeding systems to dramatically increase the required refill intervals. A fill-level sensor that is installed in the feeding system sends a signal to a controller when the minimum fill-level is reached. The controller activates the hopper and the feeder will be refilled through the outflow-chute until the fill-level sensor signals that the desired fill-level has been reached. According to the required fill-volume, the refill intervals may be reduced to once or twice per shift which...

dimension X variable X 272 approx. 674 M1:10 View shows standard execution: motor position on right side 1:10 View shows standard execution: motor position on right side

© DEPRAG. All rights and technical alterations reserved - Fri