Software Solutions & Updates
36Pages

{{requestButtons}}

Catalog excerpts

Software Solutions & Updates - 1

DEPRAG Apps Software Solutions and Updates

Open the catalog to page 1
Software Solutions & Updates - 2

Contents DEPRAG Cockpit Software for the Networked Factory! DEPRAG Cockpit the Digital Platform for Screwdriving Technology DEPRAG Cockpit – Summary The software packages and their features Part numbers Software Solutions for Screwdriving System DEPRAG Plus with sequence controller AST12 as well as for the Sequence Controllers ST5/AST6/AST11/AST40 A Possible combinations with AST controllers Interface Graph Loader ASTxx Serial Remote DEPRAG Clamp Force Control DEPRAG Friction Value Process DCON DEPRAG CONnect DEPRAG Graph Viewer for evaluation of screwdriving curves DEPRAG Data eXchange TIA...

Open the catalog to page 2
Software Solutions & Updates - 3

Contents Software Solutions for ADAPTIVE DFS DEPRAG FASTENING SYSTEM Possible combinations with ADAPTIVE DFS, the DEPRAG FASTENING SYSTEM DEPRAG Graph Viewer for evaluation of screwdriving curves ADFS Threaded Fastener ADFS Push Fastener ADFS Push Plus Fastener ADFS Calibration DEPRAG Data eXchange ADAPTIVE DFS Two Step Penetration Software Solutions for Position Control Stand PKS DEPRAG Cockpit TwinCAT Link Extended Process Control Safety & Change Tracking Software Solutions for Screwdriver Function Module with electronic stroke (E-SFM) E-SFM Manager Software Solutions for DEPRAG Feeding...

Open the catalog to page 3
Software Solutions & Updates - 4

DEPRAG Cockpit Software for the Networked Factory! Advantages • Central platform for screwdriving and assembly technology • Reliable processing data acquisition • Detailed capacity and usage statistics • Process monitoring and notifications • Analysis and recognition of trends from system messages

Open the catalog to page 4
Software Solutions & Updates - 5

DEPRAG Cockpit the Digital Platform for Screwdriving Technology Software to reduce costs and save time through the ... Parameterisation • Central platform - One software for a wide range of hardware - Web-based solution  worldwide availability - Device specific documentation: Central management of documents, e.g. operating manuals, factory certificates, machine capability study certificates,… - Automatic reminder function, e.g. for alignment or maintenance  Minimising downtime, increasing processing reliability, increasing system availability, raising productivity levels, planning...

Open the catalog to page 5
Software Solutions & Updates - 6

DEPRAG Cockpit – Summary • Continuous processing optimisation • Maximum availability due to analysis of trends and detection of anomalies • Entire process and device documentation in one place – available worldwide • Ultimate cost savings due to recognition of potentials and early detection of possible problems • Intelligent software: 80 % data saving • Responsive design • Integration of multi-brand products DEPRAG Cockpit As part of the screwdriving system DEPRAG Plus you also receive in the DEPRAG Cockpit Basic your central unser interface in responsive design - for parameterisation •...

Open the catalog to page 6
Software Solutions & Updates - 7

The software packages and their features PARAMETERISATION • Web-based parameterisation interface in responsive design • Management of global settings • Creation and organisation of screwdriving programs • Activation of screwdriving strategies and Industry 4.0 interfaces • Creation of backups PARAMETERISATION PARAMETERISATION • Basic features • Basic features • Preventive maintenance: reminder function • Central creation and parameterisation for realignment / maintenance or other tasks of screwdriving programs for all devices relating to your screwdriving tools logged in • Central management...

Open the catalog to page 7
Software Solutions & Updates - 9

Software Solutions for Screwdriving System DEPRAG Plus with sequence controller AST12 as well as for the Sequence Controllers AST5/AST6/AST11/AST40 Possible combinations with AST controllers Which software is suitable for the screwdriving system? Hardware including software Interface Graph Loader Interface Graph Loader activation key *) no PC is required for this software ASTxx Serial Remote activation key DEPRAG Clamp Force Control activation key DEPRAG Friction Value Process activation key DCON DEPRAG CONnect activation key DEPRAG Graph Viewer activation key DEPRAG Data eXchange...

Open the catalog to page 9
Software Solutions & Updates - 10

Interface Graph Loader the hardware with installed software for EC- and EC-Servo screwdriving systems in combination with the sequence controllers AST5, AST6, AST11 and AST40 The Interface Graph Loader is an optional accessory for the automatic transfer of screwdriving curves and final value data sets from DEPRAG screwdriving controllers. The Interface can be used with EC and EC servo screwdriving systems in combination with screwdriving controllers AST5, AST6, AST11 and AST40. The storage of screwdriving graphs and end value data sets (e.g. torque, angle etc.) for manual work stations and...

Open the catalog to page 10
Software Solutions & Updates - 11

DEPRAG Clamp Force Control the software for screwdriving system DEPRAG Plus as well as EC- and EC-Servo screwdriving systems in combination with the sequence controller AST12(*) /AST40 This patented, reliable and adaptive screwdriving procedure provides excellent constancy in the pre-load force even with fluctuating torque. The complete screw assembly consists of the screwdriving template seating point detection and a screw assembly to difference torque or angle. 20 licenses The main element is the seating point detection. On the basis of a torque procedure a mathematical evalu171961 /...

Open the catalog to page 11
Software Solutions & Updates - 12

DEPRAG Graph Viewer for evaluation of screwdriving curves the software for screwdriving system DEPRAG Plus as well as EC- and EC-Servo screwdriving systems in combination with the sequence controllers ASTxx and ADAPTIVE DFS During each screw assembly when using a sequence controller AST, the relevant measurement values are recorded in a file. There is now the DEPRAG Graph Viewer, to simply and easily evaluate and analyse these measurement values. The Graph Viewer opens the curve files of each sequence controller and can display the following visualisations: Single license activation key...

Open the catalog to page 12
Software Solutions & Updates - 13

DEPRAG Operator Guidance the software for the screwdriving system DEPRAG Plus as well as EC- and EC-Servo screwdriving systems in combination with the sequence controllers AST5, AST5-S, AST11 and AST12 and for the ComCenter ED The software allows for the creation of as many digital assembly instructions as required without the need for knowledge of a high-level language. The App guides the operator step by step through the assembly process. New employees can therefore be trained up quickly and efficiently. Productivity and processing quality increase as unnecessary assembly errors are...

Open the catalog to page 13

All DEPRAG SCHULZ GMBH u. CO. KG catalogs and technical brochures

  1. SENSOMAT

    4 Pages

  2. DCAM

    4 Pages

  3. Air Pliers

    8 Pages

  4. Air Chain

    2 Pages

  5. Jig Saw

    2 Pages

  6. Air Hammers

    10 Pages

  7. Air Tappers

    4 Pages

  8. Air Files

    2 Pages

  9. Belt Sanders

    6 Pages

  10. Air Motors

    28 Pages

  11. ADVANCED LINE

    40 Pages

  12. POWER LINE EN

    48 Pages

  13. BASIC LINE EN

    12 Pages

  14. NANOMAT

    2 Pages

  15. MINIMAT-EC

    12 Pages

  16. E-SFM

    8 Pages

  17. Services

    12 Pages

  18. MINIMAT-E

    8 Pages

  19. D 6600

    48 Pages

Archived catalogs