Machine Building Components SCREWDRIVER FUNCTION MODULES for the automated screw assembly

Wide product variety for all applications - Large torque range - Single- and multi-spindle execution - Different standard designs 1 Standard execution A slender design for horizontal or vertical screwdriving. 2 Short execution For limited space access. 3 Underfloor execution For a vertical, inverted assembly. 4 Vacuum execution For difficult to access or recessed screwlocations in any assembly-direction. 5 Pick & Place execution For fasteners presented to a defined pickposition. 6 Nut execution For the automatic feeding and assembly of nuts. Maximum east of integration - Compact, robust design...

Stroke variants Base position Operating position Base position Pick position Operating position Base position Operating position Without feeding With feeding With feeding for applications with pre-positioned screws for automatic screw presenting through a defined pick position for robotic applications with automatic screw feeding through a feedhose spindle-stroke and pick-stroke for lifting the fastener from a pick position mouthpiece, guide sleeve and only one actuating cylinder for the spindlestroke Customer-specific system designs are also available. Please contact us to discuss the right...

Technical data Screwdriver function module SFM-L - Light-weight and compact single-spindle design for low torque ranges Max. screw head-Ø Max. number of screwdriver spindles Torque without feeding with feeding Mouthpiece stroke Spindle stroke depends on mouthpiece stroke Stroke vacuum finder (only with vacuum execution) Stroke socket (only with nut execution) Split-jaw nosepiece / ball-type nosepiece length Operating modes Possible stroke variants Distance from mounting surface to screw axis (a) Additional strokes and other types of nosepieces are available on request. Screwdriver function module...

Technical data Screwdriver function module SFM-S - Robust multi-spindle design for the use of multiple screwdrivers and high down-load forces Max. screw head-Ø Max. number of screwdriver spindles Torque without feeding with feeding Mouthpiece stroke Spindle stroke depends on mouthpiece stroke Stroke vacuum finder (only with vacuum execution) Stroke socket (only with nut execution) Split-jaw nosepiece / ball-type nosepiece length Possible stroke variants Distance from mounting surface to screw axis (a) Operating modes Additional strokes and other types of nosepieces are available on request. *)...

MAS-SYSTEM - Increase Process Reliability, Reduce Down-time, Save costs! Difficult accessibility to the screw position? Space is too restricted for any kind of nosepiece or jaw type tooling? The MAS-System from DEPRAG in combination with a Vacuum-SFM offers the highest process reliability for restricted access screw positions. The screw is blown through a feed tube to the MAS-system where the screw is loaded onto a pick finder which is, in many cases, no larger in diameter than the head of the screw. The screw is held securely in the vertical plane (no tilting) and the “active“ two piece jaws...

Inquiry form Screwdriver Function Module Please submit your application requirements; our application consultants are standing by: Automatic Screwfeeding Operating Mode of Screwdriver Threaded Insert Mouthpiece Stroke Screwdriver Data Screw Depth Feed Stroke To Angle electronic Screwdriver Screwdriving Direction vertical from above vertical from below Desired Cycle time: Description of your Application

© DEPRAG. All rights and technical alterations reserved – Fri