Catalogs >
DEPRAG SCHULZ GMBH u. CO. KG >
MINIMAT Screwdrivers

MINIMAT Screwdrivers
4Pages

Catalog excerpts

Screwdriving Technology Automation Air Motors Air Tools machines unlimited MINIMAT Screwdrivers The basic solution for almost all screwdriving tasks straight handle design - torque from 0.2 - 20 Nm (2 to 177 in.lbs) nn nn nn nn nn robust highest precision ergonomic long-life low noise level The particular strength of the MINIMAT screwdriver in straight handle design is that it can carry out screw assemblies with torque ranges from 0.2 Nm to 20 Nm. In these ranges you can not only assemble screws but also adjust them. The ergonomic MINIMAT screwdriver is extremely durable due to its extraordinary processing quality and design for heavy industrial use. The MINIMAT clutch works with the tried and tested principle of a mechanical separation and shut-off clutch. Handheld Screwdriver pneumatic The highly precise shut-off clutch allows torque precision of ≤3% standard deviation, which is maintained for millions of assemblies. When used under the correct conditions DEPRAG pneumatic screwdrivers with shut-off clutch conform with a Cmk value of ≥1.67 with 15% tolerance in relation to 6 Sigma according to ISO 5393. In other words a Cmk value of 1.67 means that there is a failure rate of 0.6 per million screw assemblies.

Open the catalog to page 1

Screwdriver Style Driver reversible, right shut-off Push To Start_ Speed, idling Air consumption Main body dia. Length Weight Noise level Air hose dia. Hose dia for screw suction Internal hex. drive DIN ISO 1173 Quick change chuck, mounted Screwdriver Style Driver reversible, right shut-off Push To Start_ Driver reversible, right shut-off Lever Start_ Speed, idling Air consumption Main body dia. Length Weight Noose level Air hose dia. Internal hex. drive DIN ISO 1173 Quick change chuck, mounted Screwdriver Style Driver reversible, right shut-off Push To Start_ Driver reversible, right...

Open the catalog to page 2

Suitable for MINIMAT screwdriver MINIMAT SCREWDRIVER in combination with feeder Screwdriver Style Driver In combination with feeder Screws Torque min. Speed, idling Air consumption Main body dia. Length Weight Noise level Air hose dia. Type Part no. up to Nm/in.lbs Nm/in.lbs Nm/in.lbs rpm m3/min/cfm mm/in mm/in kg/lbs dB (A) mm/in. Performance data relate to an air pressure of 6.3 bar (90 PSI) Exhaust ? hose Included in delivery: Hose coupling with nozzle and nipple • Torque adjustment tools • Assortment of clutch springs Note: The mouthpiece guide, as well as the other application and...

Open the catalog to page 3

P.O. Box 1352, D-92203 Amberg, Germany Carl-Schulz-Platz 1, D-92224 Amberg Phone (+49) 9621 371-0, Fax (+49) 9621 371-120 www.deprag.com info@deprag.de © DEPRAG. All rights and technical alterations reserved – Fri DEPRAG SCHULZ GMBH u. CO.

Open the catalog to page 4