Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum Flexibility and Process Control Straight Spindle Form - Torque range from 0.2 Nm - 500 Nm Angle Head Design - Torque range from 5 Nm - 70 Nm ■■ ■■ ■■ ■■ powerful flexible high precision full documentation capability MINIMAT-EC-Servo screwdriver spindles in connection with the sequence controller AST40 allow free programming of the screw tightening process and offer maximum flexibility, accuracy and process control. Torque, speed, angle, drive direction and sequence delay times can be customized to the individual screwdriving task within the power range of the selected screwdriver spindle. The integrated torque and angle sensor module employs non contact signal transmission techniques and enables precise control of the screwdriving process as well as the documentation of the screwdriving results and process parameters and also guarantees the highest shut-off accuracy. The EC-Servo screwdriver is suitable for applications with the most demanding quality requirements – where direct measurement and control methods are required.

ADVANTAGES EC-SERVO SCREWDRIVING SYSTEM EC-Servo Screwdriver Spindle 4 available sizes in straight spindle design High power density High shut-off accuracy Flexible Noise immunity Comprehensive documentation options System diagnostics Extensive integration and control options The application of a brushless servomotor with high power density is essential to the maintenance free operation of the EC drive. It also delivers excellent dynamics and high peak torque in a compact form – ideally suited to the screw tightening process. Torque accuracies of < 1% standard deviation and thus Cmk values of...

SYSTEM COMPONENTS MINIMAT-EC-Servo, straight spindle form size 27 with quick change chuck Screwdriver with redundant measuring system for torque and angle Torque min. Torque max. Speed min. Speed max. Diameter Length 311E / 311ER Weight 311E / 311ER Noise level Internal hex. drive DIN ISO 1173 Suitable tool inserts and connecting components with a drive as per DIN ISO 1173 Type Part no. Nm/in.lbs Nm/in.lbs rpm rpm mm/in. mm/in. kg/lbs dB(A) MINIMAT-EC-Servo, straight spindle form Screwdriver Screwdriver with redundant measuring system Type for torque and angle Part no. Screwdriver with integrated...

SYSTEM COMPONENTS MINIMAT-EC-Servo, angle head design Screwdriver Type Part no. Nm/in.lbs Nm/in.lbs rpm rpm mm/in. mm/in. kg/lbs dB(A) Torque min. Torque max. Speed min. Speed max. Diameter Length Weight Noise level External square drive DIN 3121 Suitable tool inserts and connecting components with a drive as per DIN 3121 Optional Accessories Machine Capability Study Torque *) Part no. Machine Capability Study Torque angle *) Part no. - Evaluation of 50 measured values - Idle speed, Average - Standard deviation, Cm-Value, Cmk-Value *) Additional services, e.g. calibration of screwdrivers, can...

SYSTEM COMPONENTS Required Accessories Power supply cable Power supply cable Power supply cable Power supply cable Length 1.8 m/5.9 ft Length 1.8 m/5.9 ft Length 1.8 m/5.9 ft Length 2.5 m/8.2 ft Optional accessories Part no. Part no. Part no. Part no. Table stand Patch cable 2 m ASTi40 reset plug Touch pen Bus cable Length 2 m/6.56 ft, IP68 RJ45 - open wires (no connector) Cat.6 Bus cable Length 5 m/16.4 ft, IP68 RJ45 - open wires (no connector) Cat.6 Bus cable Length 2 m/6.56 ft, IP68 RJ45 - RJ45 Cat.6 Bus cable Length 5 m/16.4 ft, IP68 RJ45 - RJ45 Cat.6 Bus cable Length 2 m/6.56 ft, IP68 RJ45...

COMPONENTS for the use in manual work stations - also in connection with feeder Handle in line with spindle with quick change chuck For EC-Servo screwdriver spindles Handle Part no. Internal hex. drive DIN ISO 1173 Handle in line with spindle with vacuum connection with quick change chuck with integrated mouthpiece guide with vacuum connection Handle parallel to the spindle, turnable For EC-Servo screwdriver spindles Handle Part no. Internal hex. drive DIN ISO 1173 Handle in line with spindle with integrated mouthpiece guide for the use in connection with an automatic feeder For EC-Servo screwdriver...

SYSTEM OVERVIEW when used in manual work stations Power supply cable 385443A Motor cable 8337252 EC-Servo screwdriver spindle Linear stand Screwdriver adapter SYSTEM OVERVIEW in connection with ASTi40 Interface Graph Loader 385834A (hardware and software) Connection cable 385835D Sequence controller ASTi40 ASTi40 Reset plug 425080A and patch cable 831902 (included in delivery of the ASTi40) Power supply cable 385443A EC-Servo Screwdriver spindle

SYSTEM OVERVIEW in connection with AST40 Sequence controller AST40 connected to the screwdriver via motor cable Patch cable part no. 831902 Motor cable 1 = fieldbus or printer interface (optional) 2 = motor cable connection 3 = type plate 4 = USB interface for system image generation 5 = Ethernet connection 6 = power supply 7 = 2-channel emergency stop 8 = I / O interface PLC 1 9 = on / off switch 10 = I / O interface PLC 3 (reload signal) 11 = I / O interface PLC 2 © DEPRAG. All rights and technical alterations reserved - Fri Power supply cable