Catalogs >
DEPRAG SCHULZ GMBH u. CO. KG >
MINIMAT Control Screwdrivers pistol grip design

MINIMAT Control Screwdrivers pistol grip design
4Pages

Catalog excerpts

MINIMAT Control Screwdrivers pistol grip design - 1

Screwdriving Technology Automation Air Motors Air Tools machines unlimited MINIMAT Screwdrivers The basic solution for almost all screwdriving tasks pistol grip design - torque from 0.3 to 20 Nm / 2.7 to 177 in.lbs nn robust nn highest precision nn ergonomic nn long-life nn low noise level The particular strength of the MINIMAT screwdriver in pistol grip design is that it can carry out screw assemblies with torque ranges from 0.3 Nm to 20 Nm. In these ranges you can not only assemble screws but also adjust them. The ergonomic MINIMAT screwdriver is extremely durable due to its extraordinary processing quality and design for heavy industrial use. The highly precise shut-off clutch allows torque precision of ≤3% standard deviation, which is maintained for millions of assemblies. When used under the correct conditions DEPRAG pneumatic screwdrivers with shut-off clutch conform with a Cmk value of ≥1.67 with 15% tolerance in relation to 6 Sigma according to ISO 5393. In other words a Cmk value of 1.67 means that there is a failure rate of 0.6 per million screw assemblies. Handheld Screwdriver pneumatic Motor size 3 and 4 (lower air-inlet) Motor size 3 and 4 (lower air-inlet) Motor size 2 (lower air-inlet) Motor size 2 (lower air-inlet) Motor size 2 (upper air-inlet) Motor size 2 (upper air-inlet) Motor size 3 and 4 (upper air-inlet) Motor size 3 and 4 (upper air-inlet) Motor size 3 and 4 (rear air-inlet) Motor size 3 and 4 (rear air-inlet) Motor size 2.5 (lower air-inlet) Motor size 2.5 (lower air-inlet)

Open the catalog to page 1

MINIMAT Control Screwdrivers pistol grip design - 2

Performance data relate to an air pressure of 6.3 bar (90 PSI), Air hose dia. 6 mm/1/4”, Internal hex. drive DIN ISO 1173 - F6.3 (1/4”), integrated quick change chuck Hose coupling with nozzle and nipple • Torque adjustment tools • Assortment of clutch springs The sccrewdrivers motor sizes 2, 2.5 and 3 can also be delivered with an automatic screw feed system. Please contact us for more information! The screwdrivers motor size 2 are also available in explosion-proof design. Please contact us for more information! Suitable tool inserts and connecting components with a drive as per DIN ISO...

Open the catalog to page 2

MINIMAT Control Screwdrivers pistol grip design - 3

It is necessary to use a torque support (e.g. stand, handgrip) for maximum torque: over 10 Nm for pistol grip. Suitable torque supports can be found in our brochure D3345E. The screwdriver is actuated by trigger. If needed, exhaust hoses can be connected to the screwdriver; this will direct exhaust air away from the assembly area. For size 3 pistol-grip drivers, we offer additional side-handles, which are an useful addition for higher torque values.

Open the catalog to page 3

MINIMAT Control Screwdrivers pistol grip design - 4

P.O. Box 1352, D-92203 Amberg, Germany Carl-Schulz-Platz 1, D-92224 Amberg Phone (+49) 9621 371-0, Fax (+49) 9621 371-120 www.deprag.com info@deprag.de © DEPRAG. All rights and technical alterations reserved - Fri DEPRAG SCHULZ GMBH u. CO.

Open the catalog to page 4