Catalogs >
DEPRAG SCHULZ GMBH u. CO. KG >
MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM

MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM
8Pages

Catalog excerpts

MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM - 1

Handheld Screwdriver pneumatic MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM The screwdriving system with additional function control nn Handheld screwdriver nn Multi function control nn Pneumatic control The handheld screwdrivers in connection with the function controller and the pneumatic control offer a complete solution for the process reliability of your manual assemblies.

Open the catalog to page 1

MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM - 2

The screwdriving system in connection with fc11 function control and pc11 pneumatic control nn counts screwdriving cycles - supervises assembly times nn only shuts-off when the preset torque is reached nn recognizes change of parts nn controls itself - 100 % nn design selection of the screwdriver according to application (inline, pistolgrip, angle-head) nn eliminates a costly follow-up check After detecting the start signal from the screwdriver (operator push down or start trigger), the air supply to the driver is enabled via the new multi function control combined with the pneumatic...

Open the catalog to page 2

MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM - 3

The screwdriving system in connection with fc20 function control and pc20 pneumatic control nn highest process reliability: controls itself up to 100% nn counts screwdriving cycles - supervises assembly times nn only shuts-off when the preset torque is reached nn recognizes change of parts nn allows the connection of up to 3 different screwdrivers nn design selection of the screwdrivers according to application (inline, pistolgrip, angle-head) nn individual screw-process configuration through free programmability nn integrated torque measuring function, diagnostics and evaluation nn...

Open the catalog to page 3

MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM - 4

SYSTEM COMPONENTS MICROMAT-F Screwdriver, straight handle design Driver right rotation Screwdriver in combination with feeder Screws Torque min. Torque max. (soft pull-up) Torque max. (hard pull-up) Speed, idling Internal hex. drive DIN ISO 1173 Motor Size 0 Type Part no. Type Part no. up to Ncm / in.oz Ncm / in.oz Ncm / in.oz rpm Further technical details see product catalog D3420E. MINIMAT-F Screwdriver, straight handle design Driver right rotation Type Part no. Type Part no. Screws Torque min. Torque max. (soft pull-up) Torque max. (hard pull-up) Speed, idling Internal hex. drive DIN ISO...

Open the catalog to page 4

MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM - 5

SYSTEM COMPONENTS MINIMAT-F Screwdriver, pistolgrip Driver right rotation lower air-inlet Driver right rotation upper air-inlet Screws Torque min. Torque max. (soft pull-up) Torque max. (hard pull-up) Speed, idling Internal hex. drive DIN ISO 1173 Driver reversible lower air-inlet Driver reversible upper air-inlet Screws Torque min. Torque max. (soft pull-up) Torque max. (hard pull-up) Speed, idling Internal hex. drive DIN ISO 1173 up to Nm / in.lbs Nm / in.lbs Nm / in.lbs rpm MINIMAT-F Screwdriver, pistolgrip Driver right rotation Screws Torque min. Torque max. (soft pull-up) Torque max....

Open the catalog to page 5

MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM - 6

SYSTEM COMPONENTS Multi function controllers fc20 and fc11 Function control Amount of connectable drivers Voltage Power consumption Display and operation Operation via RS232 interface PLC interface Power output Connection for part sensor Connection for in-line torque transducer Dimensions (W x H x D) Weight 3 24V 40 TFT - graphic display 4.3” (480x272 pixel) with touch screen touch screen yes yes yes (5 pieces) yes (3 pieces) yes 243 x 200 x 90 / 9.5 x 7.8 x 3.5 2.9 / 6.4 1 24V 40 LC-display alphanumeric 4-lines, 16 digits per line keypad no yes – yes (on pc11) – 160 x 80 x 40 / 6.2 x 3.1 x...

Open the catalog to page 6

MICROMAT-F / MINIMAT-F SCREWDRIVING SYSTEM - 7

Optional equipment Suitable for function control fc20 in connection with pneumatic control pc20 Suitable for Proximity switch for parts control capacitive M18 capacitive M12 inductive M18 Screwfeeder connection set cable length 1 m (3.3 ft.) / 2 m (6.6 ft.) / 3 m (9.9 ft.) Sensor (for signal break screw presenter) for SG1211 for SG0211 Touch pen Printer type ND350 Table stand In-line torque transducer (for torque measurement) 0.2-2 Nm / 0.5-5 Nm / 1-10 Nm / 2-20 Nm Connection cable for in-line torque transducer 2 m (6.6 ft.) / 4 m (13.2 ft.) / 6 m (19.8 ft.) Part no. Part no. Part no. Part...

Open the catalog to page 7