Handheld Screwdriver pneumatic for special applications nn low-vibration nn low noise level nn optimal design of the open-pored plastic grip nn high repeatability Handheld Screwdriver pneumatic for special applications Impulse Screwdriver with automatic shut-off Low-vibration screwdrivers with an integrated hydraulic impulse mechanism Torque range: 4 – 120 Nm (35.4 – 1060 in.lbs) The low-vibration impulse screwdriver allows the fast tightening of fasteners without any tangible torque reaction. The ergonomic inline or pistolgrip design enables fatigue-free operation despite the high torque output. The impulse tool is a similar design to an impact driver, however with integrated hydraulic impulse unit. The torque output is controlled by the frequency, (= pulse per minute) and by the adjustment of the pulse unit. When the preset pressure in the pulse unit is reached, which is relative to the torque output, the driver shuts off. This shut-off transpires prior to achieving the theoretical maximum possible torque and therefore no hammer effect occurs, as with standard impact drivers. This technique of regulating both pressure and frequency, allows a torque accuracy of ± 5 % standard deviation for pulse drivers with a torque setting even below 10 Nm (88 in.lbs). To enhance the versatility of this tool, the reverse torque is 20 % higher than the seating torque, to assist in rework application.

Technical Data – Pulse Tools, Style with shut-off – Straight handle design Reversible with quick change chuck For screws Torque min. (soft pull-up) Torque max. (soft pull-up) Torque min. (hard pull-up) Torque max. (hard pull-up) Speed, idling Air consumption Distance from spindle centre to side Length Weight Air hose dia. Air inlet pipe thread size Internal hex. drive DIN ISO 1173 Nm / in.lbs Nm / in.lbs Nm / in.lbs Nm / in.lbs rpm m3/min/cfm Suitable tool inserts and connecting components with a drive as per DIN ISO 1173 Included in delivery: Hose coupling with nozzle and nipple or just hose...

Technical Data – Pulse Tools, Style with shut-off – Pistol grip Reversible with square drive For screws Torque min. (soft pull-up) Torque max. (soft pull-up) Torque min. (hard pull-up) Torque max. (hard pull-up) Speed, idling Air consumption Distance from spindle centre to side Length Weight Air hose dia. Air inlet pipe thread size External square drive DIN 3121 Nm / in.lbs Nm / in.lbs Nm / in.lbs Nm / in.lbs rpm m3/min/cfm Suitable tool inserts and connecting components with a drive as per DIN 3121 Included in delivery: Hose coupling with nozzle and nipple or just hose nozzle · Torque adjustment...

© DEPRAG. All rights and technical alterations reserved - Fri