1. Catalogs
  2. DEPRAG SCHULZ GMBH u. CO. KG
  3. GET GREEN ENERGY TURBINE

GET GREEN ENERGY TURBINE

GET GREEN ENERGY TURBINE

GET GREEN ENERGY TURBINE

Product catalog summary
Overview
The GET Green Energy Turbine is a gas expansion turbine with a generator designed to convert residual or waste energy into electrical energy. It operates within a performance range of 5 to 350 kW and can be used for network feeding or in-house industrial consumption. DEPRAG, a leading manufacturer, has supplied over 300 turbine generators globally, contributing to energy efficiency and CO2 emission reduction.

Product Specifications
The turbine consists of an expansion turbine and generator, suitable for decentralized energy recovery. It can be integrated into various systems, including open systems using pressure and temperature gradients and closed cycles like the Organic Rankine Cycle (ORC). The turbine boasts an efficiency of up to 80% and requires minimal maintenance due to its direct drive design.

Technical Features
  • Generator sizes: 5, 30, 60, 120, 175 kW (additional sizes on request)
  • Pressure range: 0 - 63 bar (higher pressures on request)
  • Temperature range: -20°C to 250°C
  • Suitable mediums: compressed air, CO2, refrigerants, siloxane, alkane
  • Not suitable for: hydrogen, oxygen

Applications
The turbine is versatile, suitable for energy recovery in industrial processes, power stations, and geothermal energy. It can convert pressure energy into electricity, recover waste heat, and utilize geothermal energy for power generation.

Research and Development
DEPRAG invests in sustainable energy research, collaborating with institutions like the East Bavarian University of Applied Sciences and the University of Bayreuth. Notable projects include "TurboSmart," focusing on adaptive micro expansion turbines for energy recovery.

Conclusion
The GET Green Energy Turbine offers a cost-effective, efficient solution for energy recovery, supporting sustainable practices and innovation in the energy sector.
See more

Catalog excerpts

GET GREEN ENERGY TURBINE-1

Green Energy GET GREEN ENERGY TURBINE Gas expansion turbine with generator

 Open the catalog to page 1
GET GREEN ENERGY TURBINE-2

THE GET TURBINE GENERATOR ... AN INNOVATION THAT PAYS YOU BACK! The turbine generator is used to recover even small amounts of residual or waste energy and convert it into electrical energy. The performance range of the turbine is between 5 and 350 kW. This electricity can be fed into the network or used for inhouse industrial consumption. As a leading manufacturer of expansion turbines, DEPRAG can be instrumental in increasing your energy efficiency. The goal of reducing CO2 emissions can therefore be achieved as part of the Germany Federal government’s requirements for climate protection. To...

 Open the catalog to page 2
GET GREEN ENERGY TURBINE-3

TURBINE GENERATOR FUNCTION The GET Green Energy Turbine is a turbo machine which can be used axially or radially with one or more stages. The expander converts the available energy into electrical energy due to the expansion of a gas from high to low pressure at constant mass flow. As an impulse or reaction turbine, the kinetic energy is passed into the jets and turbine wheel. Axial turbine Radial turbine n High degree of efficiency even outside nominal operating conditions  enables extremely efficient operation even at partial load n Axial impulse or constant pressure turbines, single or double...

 Open the catalog to page 3
GET GREEN ENERGY TURBINE-4

FUTURE-ORIENTED RESEARCH AND DEVELOPMENT AT DEPRAG DEPRAG continually invests in research and development. It is our aim to give further impetus to the use of sustainable energy supported by new ideas and innovative solutions. We also rely on cooperation with external institutions and higher education facilities: cooperation with DEPRAG and the Center for Energy Technology at the University of Bayreuth. It dealt with the intelligent use and generation of electricity from process heat. n East Bavarian University of Applied Sciences (OTH) Amberg-Weiden – Center of Excellence for Cogeneration Technologies...

 Open the catalog to page 4

All DEPRAG SCHULZ GMBH u. CO. KG catalogs and technical brochures

  1. SENSOMAT

    4  Pages

  2. DCAM

    4  Pages

  3. Air Pliers

    8  Pages

  4. Air Chain

    2  Pages

  5. Jig Saw

    2  Pages

  6. Air Hammers

    10  Pages

  7. ADVANCED LINE

    40  Pages

  8. POWER LINE EN

    48  Pages

  9. BASIC LINE EN

    12  Pages

  10. NANOMAT

    2  Pages

  11. MINIMAT-EC

    12  Pages

  12. E-SFM

    8  Pages

  13. Services

    12  Pages

  14. D 6600

    48  Pages

  15. MINIMAT-E

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.