SCREWDRIVER FUNCTION MODULE WITH ELECTRONIC STROKE (E-SFM)

ADVANTAGES > Flexibility The Screwdriver Function Module with electronic stroke (E-SFM) has been optimally designed to react flexibly to complex screwdriving tasks, new fasteners and varying assembly requirements. > Precise parameter control  force  speed  position Fast approach Gentle engagement Final tightening at high force Integrated depth sensor Fast withdrawal > Process reliability Avoid applying unnecessary stress to your component by optimally adjusting force and speed in your screwdriving application. A gentle engagement process will extend the life of your bit. > Improved cycle time...

Without feeding With Pick-and-Place  if the fastener is fed using pick-and-place or via hose and precisely positioned using vacuum tube With feeding With feeding With feeding  mouthpiece with active nosepiece jaws (MAS) With feeding With feeding  mouthpiece with active nosepiece jaws swivel (MASS)

Without feeding With feeding tiltable mouthpiece With feeding MAS With feeding swivel mouthpiece With feeding MASS With feeding rigid mouthpiece

Switch cabinet Power supply Motor cable Sequence controller „Safe stop“ module (optionally) Software E-SFM Manager

Technical data Screwdriver Function Mudule with electronic stroke (E-SFM) Screw head-ø max. Torque range Nosepiece length Free stroke for vacuum Installation position / working direction Linear axis Size Motor attachment Positioning accuracy Speed max. Pressure force Feed versions Without feeding Pick-and-Place With feeding - rigid mouthpiece With feeding - tiltable mouthpiece With feeding - swivel mouthpiece With feeding - mouthpiece with active nosepiece jaws With feeding - mouthpiece with active nosepiece jaws swivel The attainable swivel pressure force is dependent on the installation position...

Software E-SFM Manager (included in delivery) - material no. 143038 The E-SFM Manager is used for parameter adjustment of travel programs (sequences), as well as to save these defined sequences on the E-Control. The download link is printed on the invoice. Optional component for the installation into a switch cabinet - material no. 105452A „Safe stop“ module The “Safe stop” module disconnects the power supply to the linear axis. Power supply for the E-control remains unchanged. Disconnection is implemented with two channels with feedback contacts so that a performance level PL e in accordance...

© DEPRAG. All rights and technical alterations reserved – Fri