Catalog excerpts
Screwdriving Technology Air Pliers Hand-held pliers for the use of: Cutting Angle Forming and Flattening Sealing Operations Pressing Mounting clamps High Power - max. cutting force 8700 N - max. squeeze force 4500 N Easy Handling Long Lifespan Air pliers are suitable for the industrial use for example in the automotive industry, in machine building industry, in the appliance industry as well as in maintenance and assembly departments. Pliers for sealing and stamping seals DEPRAG CZ a.s. offers air pliers for sealing and stamping seals. For more informations contact please our product specialists.
Open the catalog to page 1ADVANTAGES Pneumatic pliers for the use of: • • • • • • Cutting Cu, Al, Ag, plastic materials (PVC, PF) and steel max. 400 N/mm2/ 25 long tons/sq.in Simultaneous cutting and wire-end flattening or Simultaneous cutting and 90°angle forming of wire ends of electronic components Sealing operations Pressing of cable joints Mounting of CLIC-, COBRA-, hose- or spring clamps Easy Handling The favorable weight/dimension to power ration (max. cutting force 8 700 N, max. squeeze force 4 500 N) makes them very handy and easy to work. The plier inserts can be operated in any cutting position by turning...
Open the catalog to page 2SPECIFICATIONS - PLIERS FOR CUTTING, WITHOUT PLIER INSERTS Pliers for cutting,with trigger and integrated lever-lock to avoid unintentional start. P0181Z-C00 Model Part Number Pliers insert, mounted (optional accessories) Length L (without plier insert) Body diameter D Weight (without plier insert) I.D. of air inlet hose Air connection/Stroke Air connection Max. opening width of plier inserts depends on type of plier inserts. Standard Equipment: Quick release coupling, Part No. 804250 Pliers for cutting, with safety lever. These pliers are made for heavy-duty applications and provide...
Open the catalog to page 3SPECIFICATIONS - PLIERS FOR CLAMPS-MOUNTING, WITH PLIER INSERTS Pliers for CLIC-clamps, with safety lever. P0383X-P00-190CL08 Model Part Number Basic position Width of clamp Insert opening, adjustable Pliers insert, mounted Max. opening width Min. closing width Air consumption/stroke Length L (with plier insert) Body diameter D Weight (with plier insert) I.D. of air inlet hose Air connection Standard Equipment: Quick release coupling, Part No. 804250 Pliers for standard hose, with safety lever. P0383X-S00-190R08 Model Part Number For hose clamps Basic position Width of clamp Insert opening,...
Open the catalog to page 4SPECIFICATIONS - PLIERS FOR CLAMPS-MOUNTING, WITH PLIER INSERTS Pliers for COBRA-clamps, with safety lever. P0383X-P00-190CO Model Part Number Basic position Width of clamp Insert opening, adjustable Pliers insert, mounted Max. opening width Min. closing width Air consumption/stroke Length L (with plier insert) Body diameter D Weight (with plier insert) I.D. of air inlet hose Air connection Standard Equipment: Quick release coupling, Part No. 804250 Pliers for spring-clamps, with safety lever. P0452X-P00-IFE Model Part Number For spring clamps Basic position Width of clamp Insert opening,...
Open the catalog to page 5OPTIONAL ACCESSORIES - PLIER INSERTS Plier Insert - Type Part Number Cutting Angle * without angle without angle without angle 25 25 25 without angle without angle without angle Cutting Geometry see page 7 A B C A B C A B C A B C without angle without angle without angle 30 30 30 without angle without angle without angle 25 25 25 without angle without angle without angle 25 25 25 without angle without angle without angle 30 30 30 **) The stated value is just a theoretical figure, describing the max. diameter which can be inserted in the plier inserts. This value is derived from the...
Open the catalog to page 6* CUTTING ANGLE TYPE KEY - CUTTING INSERTS I 38 C 25 HK2 Cutting design - see below Cutting angle: 00 = Without angle, 25 = 25° Insert: C = For cutting 38 = Cylinder diameter [mm], 38 mm Insert CUTTING GEOMETRY A Application: Plastics, copper, soft aluminium, small crosssections, steel Characteristics: Both jaw inserts made from hardened material, upper jaw has a sharp edge, lower jaw is flat (no edge) Application: Hard, reinforced plastics (GFK), steel (limited), reinforced copper, larger cross-sections Application: Hard, reinforced plastics (GFK), steel (limited), reinforced copper,...
Open the catalog to page 7DEPRAG CZ a.s., T. G. Masaryka 113, 507 81 Lázně Bělohrad - Czech Republic Tel.: +420-493 771 511, Fax: +420-493 771 623, E-mail: sales@deprag.cz, Internet: www.deprag.cz Specifications subject to change without prior notice machines unlimited
Open the catalog to page 8All DEPRAG SCHULZ GMBH u. CO. KG catalogs and technical brochures
-
Torque Transducers
8 Pages
-
SENSOMAT
4 Pages
-
Flat Head Screwdriver
2 Pages
-
DCAM
4 Pages
-
GET GREEN ENERGY TURBINE
4 Pages
-
Air Turbine Drill
2 Pages
-
Air Chain
2 Pages
-
Jig Saw
2 Pages
-
Air Hammers
10 Pages
-
Air Impact Tools
4 Pages
-
Air Tappers
4 Pages
-
Drills - Pistolgrip
8 Pages
-
Pneumatic Angle Drills
4 Pages
-
Pneumatic Straight Drills
2 Pages
-
Straight Drills
6 Pages
-
Air Files
2 Pages
-
Air Grinders - Angle
8 Pages
-
Air Grinders with Collets
6 Pages
-
Air Polishers
8 Pages
-
Belt Sanders
6 Pages
-
Air Motors
28 Pages
-
ADVANCED LINE
40 Pages
-
POWER LINE EN
48 Pages
-
BASIC LINE EN
12 Pages
-
Storage Devices
4 Pages
-
Measurement devices
4 Pages
-
MICROMAT / MINIMAT Screwdrivers
24 Pages
-
NANOMAT
2 Pages
-
Screwdriving System DEPRAG Plus
32 Pages
-
Pneumatic Power Tools
40 Pages
-
Software Solutions & Updates
36 Pages
-
Step Feeder System D3835E
20 Pages
-
MINIMAT-EC
12 Pages
-
E-SFM
8 Pages
-
GET Turbine Generator
8 Pages
-
Services
12 Pages
-
Controller Technology
12 Pages
-
Inserting Tools for Screwdrivers
20 Pages
-
MINIMAT Screwdrivers
4 Pages
-
MINIMAT-E
8 Pages
-
D 6600
48 Pages
-
MINIMAT-T Depth Stop Driver
2 Pages
-
Screw Presenter
6 Pages
Archived catalogs
-
Feeding Technologies D3810
36 Pages