PowerScout 3 HD
3Pages

POWERSCOUT ™ 3 HD NETWORKED 3-PHASE METER REVENUE GRADE INSTRUMENTS FOR SUPERIOR ENERGY MEASUREMENT Bi-directional Metering Tenant Submetering Data Centers Real-Time Power Monitoring in Commercial, Retail, and Industrial environments DIN Rail Enclosure Pictured (PS3HD-R-D-N). Wall Mount Enlosure (PS3HD-C-D-N) also available. MAINS MONITORING The PowerScout 3 HD is the final model in the HD family replacing the PowerScout 3037 as DENT Instruments’ 3-channel 3-phase meter. The PS3HD brings increased measurement performance and communication options in a single SKU. It can utilize any of DENT’s internally-shunted, 333 mV output splitcore or RōCoil CTs. Monitor a single three phase load or network with other PowerScout HD meters to monitor several loads across your facility. 3 channels: 3-phase submeter monitors voltage, current, power, energy, and many other electrical parameters on single or threephase systems Two models available: DIN Rail Mount Enclosure or Wall Mount Enclosure Revenue grade. Third-party ANSI C12.20-2015 Class 0.2 certification (pending) Interval Data Recording: Store up to 63 days of 15-minute kWh data Continuous sampling; no blind cycles. Use with a full range of DENT Split Core or RōCoil™ Rogowski-style CTs, including several revenue-grade options Line-Powered: 90-600V Phase-to-Phase Power Supply Display shows real-time information about the meter configuration and metered data The PowerScout 3 HD is available in a compact enclosure to facilitate mounting in the UL-approved enclosure of your choice using DIN rail or in a wall-mount enclosure that’s ready to be installed near your panel or switch gear. Communicate using either BACnet or Modbus protocol User-configurable alarm with isolated output Data updates occur every 1.0 seconds QUICK SETUP Patented PhaseChek™ technology confirms proper CT orientation UL Listed, CE Mark, BTL Certification (pending) REVENUE-GRADE PERFORMANCE With high speed continuous sampling, data updates rate of 1 Hz and ANSI C12.20-2015 Class 0.2 revenue grade accuracy (depending on CT), the PowerScout 3 HD is well-suited for accountability metering in commercial, retail, and industrial facilities including demand response and tenant submetering. PowerScout 3 HD instruments are line-powered with an internal wide-range power supply, allowing line-to-line voltages from 90-600 VAC. For convenience, the PS3HD also includes a USB (Type C) connector which allows the meter to be powered from a host PC or laptop computer during configuration. INDUSTRY-STANDARD MODBUS OR BACNET The PowerScout 3 HD supports both Modbus (based on SunSpec IEEE-754) and BACnet communications protocols. Communications interface can be accomplished through serial RS-485 or Ethernet using either Modbus RTU, BACnet MS/TP, Modbus TCP, or BACnet IP protocols. The PowerScout 3 HD can be configured using one of two interfaces: PC Application ViewPoint HD or Web Browser. Configurations can be saved to a template for re-use. Use the on-board LCD and thumb wheel to verify setup. POWERFUL TROUBLESHOOTING The PowerScout 3 HD meter includes DENT’s patented* PhaseChek™ circuitry for identifying mis-phased and backwards CTs. When used in conjunction with ViewPoint HD, advanced analytics are available including waveform visualization, vector polar plotting and harmonic distortion analysis.

POWERSCOUT ™ 3 HD SPECIFICATIONS TECHNICAL SERVICE TYPE Single Phase, Three Phase-Four Wire (WYE), Three Phase-Three Wire (Delta) From L1 Phase to L2 Phase. 90-600VAC RMS CAT III 50/60 Hz, 500 mA AC Max 0.5 A internal fuse protection. 200 KA interrupt. VOLTAGE CHANNELS 80-346 Volts AC Line-to-Neutral, 600 V Line-to-Line, CAT III. CURRENT CHANNELS 3 channels, 0.525 VAC max, 333 mV CTs, 0-4,000+ Amps depending on CT MAXIMUM CURRENT INPUT 150% of current transducer rating (mV CTs) to maintain accuracy. Measure up to 4000 A with RōCoil CTs MEASUREMENT TYPE True RMS using high-speed digital...

POWERSCOUT ™ 3 HD ANATOMY TWO AVAILABLE CONFIGURATIONS Available to be mounted in the external enclosure of your choice or as a self-contained wall-mounted enclosure option. DIN RAIL MOUNT ENCLOSURE Thumb Wheel for Menu Navigation USB-C High Voltage Cover Ethernet Port WALL MOUNT ENCLOSURE Wall Mount Enclosure Top 12. Mounting Holes 13. PS3HD Circuit Board 14. Voltage Connection 15. High Voltage Cover (transparent in photo) Energy & Power Measurement Solutions DISTRIBUTOR: PLACE CONTACT INFO HERE An ISO 9001:2015 Certified Company 925 SW EMKAY DRIVE BEND, OREGON 97702 USA 541.388.4774 |...