600/1000A LARGE SPLIT CORE CURRENT TRANSFORMERS Split-core current transformers provide linear output voltage that is directly proportional to the input current. These transformers are safely and easily installed over existing electrical power lines without disconnecting the lines or interrupting service. DENT's energy monitoring components are used for a variety of applications including building automation, tenant submetering, performance verification, energy management, and new technology assessment. Current Range 600A Model: 30 - 780A AC 1000A Model: 20 - 1300A AC Output 333 mV at rated current Ratio Error <1% at rated current (typical) Phase Error <2° at rated current (typical) Output Wire Polarity Frequency Range 333 mV at rated current White = Hi, positive (+) Black = Low, negative (-) 50 to 400 Hz MECHANICAL Case Material Epoxy encapsulated housing Leads 2.7 M (8'), twisted pair, 20 SAFETY Working Voltage 600 VAC, Category III Dielectric Strength Certification 600V rated leads Conforms to: UL STD 61010-1 EN 60044-1 Certified to: CAN/CSA STD C22.2 No. 61010-1 PART NUMBERS CT-SCL-0600-U/B 600A Large Split Core CT-SCL-1000-U/B 1000A Large Split Core CONTACT US All specifications contained in this document are subject to change without notice. © DENT INSTRUMENTS, INC. rev041014 925 SW EMKAY DRIVE DENT Instruments, Inc. bend, Oregon 97702 usa Energy & Power Measurement Solutions 541.388.4774 | 800.388.0770