1000A CTs Clamp-on current transformers are the "one-hand" operating solution for short- or long-term studies. They are designed to work in tight places and easily clamp around large wires and cables. DENT Instruments clamp-on current transformers are used for a variety of applications, including building automation, tenant submetering, performance verification, management and new technology assessment. < 1% From 20—40 A AC Phase Shift < 0.5° From 40—1200 A AC ELECTRICAL Max Output Wire Polarity Phasing Orientation Frequency Range 666 mV @ 2000 A Red = Hi, positive (+) Black = Low, negative (-) Arrow on Case Points Toward Load 30 Hz to 10 kHz MECHANICAL Material Polycarbonate, UL 94 V-0 SAFETY Working Voltage 600 VAC Category III Dielectric Strength 5200 VAC, 50/60 Hz between primary, secondary and the outer case of the handle PART NUMBERS CT-CON-1000-U Crimp ferrules on leads CT-CON-1000-B With Banana Plugs (for use with Weather-tight PRO-series Instruments) 925 SW EMKAY DRivE DENT Instruments, Inc. Ben0, Oreg°n 97701 usa Energy & Power Measurement Solutions 541.388.4774 | 800.388.0770 www.DENTiNsTRuMENTs.coM All specifications contained in this document are subject to change without notice. © DENT INSTRUMENTS, INC. rev 102814