SPEEDLINE SLM SIDE-LOADING REFUSE COLLECTOR The TERBERG ENVIRONMENTAL Group’s extensive experience, with one of the leading manufacturers of high-tech lift systems, a tried and tested Speedline range in Germany and two large body assembly plants, has resulted in a highly efficient and robust unit with countless innovations. The Speedline SLM side-loading refuse collector features a high absorption capacity, thanks to the combination of its short cycle time, high-volume compaction chamber and a design that makes it easier for waste to be deposited inside of it.

SPEEDLINE SLM SIDE-LOADING REFUSE COLLECTOR 1 PROPORTIONAL HYDRAULICS High-end proportional hydraulics that reduce load losses (high efficiency/lower energy consumption). 4 INSPECTION DOOR Large dimensions. can be opened without needing to move the lift assembly. 2 LARGE HOPPER Which increases its absorption capacity. 5 SOUNDPROOFED CABINET On the opposite side to the lift assembly. where all the hydraulic. pneumatic and electrical circuits are hosted. 3 TWO LEACHATE TANKS ne on the rear door and one on the body, amounting to a O total of 327 l / 257 l, depending on the body/capacity. OPTIONAL...

A DVANTAGES OF THE SPEEDLINE SLM SIDE-LOADING COMPACTOR COLLECTOR • Compaction adapted to the type of waste. • Different operating modes: ECO, Comfort, Sport. • Centralised greasing • Compaction cycle time (s) 11 • The sides of the body and rear door are made with a single steel sheet which is highly resistant to wear and corrosion. • Greater leachate collection capacity. Two leachate compartments. one on the body and the other on the rear door. • Pack on the Move. Performs compaction while the unit is moving. • Automatic brake: The brake remains engaged, even without pressing the pedal or engaging...

WEIGHTS AND DIMENSIONS MODEL Chassis GVW (t) (1) Bodywork volume (m3) Useful hopper capacity (m3) Bodywork with lift tare weight (kg) Recom. wheelbase: 1-2 axle (mm) Recom. wheelbase: 2-3 axle (mm) Rear door length (mm) Body + hopper + compaction system length (mm) Total vehicle length (mm)* * The total length will vary depending on the front overhang of the chassis and the final distance from the body. • Compliance with European standards EN1501-1 and EN1501-5. •.Compliance with Directive 2006/42/EC on machinery safety. •.Compliance with European standard 2000/14/EC on noise emission. •.Certificate...