Solenoid Data Sheet Catalog
114Pages

Deltrol CONTROLS

Deltrol CONTROLS C-FRAME SOLENOID Two position linear solenoid with C-frame construction. Features • Economical construction • AC solenoids and DC solenoids available • Tape Wrapped coils on most models • UL approval on many models Electrical Specifications Coil Voltages Coil Power 4.5 VA Continuous, 12 VA Intermittent, 45 VA Pulse 3.5 Watts Continuous, 8 Watts Intermittent, 35 Watts Pulse Coil Termination Duty Cycle Continuous, Intermittent, Pulse (see standard part numbers on page 4) Coil Treatment Tape Wrapped Insulation Class Dielectric Strength 30 Volts and Under: 500 VRMS Over 30...

Dimensional View LEAD WIRES MOUNTING HOLES UNLESS OTHERWISE SPECIFIED Specifications subject to change without notice 2 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, Wl 53215 USA I P: 414.671.6800 I F: 414.671.6809 I www.deltrol-controls.com I sales@deltrol.com

Force Curves DC Continuous Duty - 3.5 Watts DC Intermittent Duty - 8 Watts DC Pulse Duty - 35 Watts Standard intermittent duty cycle at nominal voltage is 25%, with one (1) minute maximum "ON" and three (3) minutes minimum "OFF" in a repetitive cycle. Standard Pulse duty cycle is 10% with 100 milliseconds "ON" and 900 milliseconds "OFF". NOTE: Approx 36 sq. in. Heat Sink Required Specifications subject to change without notice ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, Wl 53215 USA I P: 414.671.6800 I F: 414.671.6809 I www.deltrol-controls.com I...

Deltrol CONTROLS Standard Part Numbers Duty Cycle Typical Force (oz). 100% Voltage, 77°, Stroke @ Resistance (Ohms) (*) Normally Stocked Non stocked items require a minimum order Specifications subject to change without notice ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: ­ 14.671.6809 | www.deltrol-controls.com‌| sales@deltrol.com 4

Deltrol CONTROLS C-FRAME SOLENOID Two position linear solenoid with C-frame construction. Features • Economical construction • AC solenoids and DC solenoids available • Tape Wrapped coils on most models • UL approval on many models Electrical Specifications Coil Voltages Coil Power 4.7 VA Continuous, 14 VA Intermittent, 47 VA Pulse, 3.7 Watts Continuous, 11 Watts Intermittent, 42 Watts Pulse Coil Termination Wire leads 22 AWG (standard) Duty Cycle Continuous, intermittent, pulse (see standard part numbers on page 4) Coil Treatment Tape Wrapped Insulation Class Dielectric Strength 30 Volts...

Dimensional View MOUNTING HOLES UNLESS OTHERWISE SPECIFIED Specifications subject to change without notice 2 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, Wl 53215 USA I P: 414.671.6800 I F: 414.671.6809 I www.deltrol-controls.com I sales@deltrol.com

Force Curves DC Continuous Duty - 3.7 Watts DC Intermittent Duty -11 Watts DC Pulse Duty - 42 Watts Standard intermittent duty cycle at nominal voltage is 25%, with one (1) minute maximum "ON" and three (3) minutes minimum "OFF" in a repetitive cycle. Standard Pulse duty cycle is 10% with 100 milliseconds "ON" and 900 milliseconds "OFF". NOTE: Approx 36 sq. in. Heat Sink Required Specifications subject to change without notice ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, Wl 53215 USA I P: 414.671.6800 I F: 414.671.6809 I www.deltrol-controls.com I...

Deltrol CONTROLS Standard Part Numbers Duty Cycle Typical Force (oz). 100% Voltage, 77°, Stroke @ Resistance (ohms) (*) Normally Stocked Non stocked items require a minimum order Specifications subject to change without notice ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: ­ 14.671.6809 | www.deltrol-controls.com‌| sales@deltrol.com 4

Deltrol CONTROLS C-FRAME SOLENOID Two position linear solenoid with C-frame construction. Features • Economical construction • AC solenoids and DC solenoids available • Encapsulated coils on most models • UL approval on many models Electrical Specifications Coil Voltages Coil Power 6.8 VA Continuous, 19.6 VA Intermittent, 68 VA Pulse 4.7 Watts Continuous, 12 Watts Intermittent, 45 Watts Pulse Coil Termination 0.187” Quick Connect/Solder Lug (standard) 0.250” Quick Connect/Solder Lug (optional) Wire Leads (optional with tape wrapped coil) Duty Cycle Continuous, intermittent, pulse (see...

Dimensional View MOUNTING HOLES UNLESS OTHERWISE SPECIFIED Specifications subject to change without notice 2 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, Wl 53215 USA I P: 414.671.6800 I F: 414.671.6809 I www.deltrol-controls.com I sales@deltrol.com

Force Curves DC Continuous Duty - 4.7 Watts DC Intermittent Duty -12 Watts DC Pulse Duty - 45 Watts Standard intermittent duty cycle at nominal voltage is 25%, with one (1) minute maximum "ON" and three (3) minutes minimum "OFF" in a repetitive cycle. Standard Pulse duty cycle is 10% with 100 milliseconds "ON" and 900 milliseconds "OFF". NOTE: Approx 36 sq. in. Heat Sink Required Specifications subject to change without notice ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, Wl 53215 USA I P: 414.671.6800 I F: 414.671.6809 I www.deltrol-controls.com I...

Deltrol CONTROLS Standard Part Numbers Duty Cycle Typical Force (oz). 100% Voltage, 77°, Stroke @ Resistance (Ohms) (*) Normally Stocked Non stocked items require a minimum order Specifications subject to change without notice ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: ­ 14.671.6809 | www.deltrol-controls.com‌| sales@deltrol.com 4