1. Catalogs
  2. Deltrol Controls
  3. MED 24x1.700 Tubular Frame Solenoid

MED 24x1.700 Tubular Frame Solenoid

MED 24x1.700 Tubular Frame Solenoid

MED 24x1.700 Tubular Frame Solenoid

Product catalog summary
Electrical Specifications
The solenoid operates with coil voltages of 6, 12, 24, and 110 VDC. It has a coil power of 12 Watts for continuous use, 33 Watts for intermittent use, and 120 Watts for pulse use. The coil termination is via 20 AWG wire leads, and it supports continuous, intermittent, and pulse duty cycles. The coil is tape wrapped and has an insulation class of B, rated at a maximum of 130ºC (265ºF). Dielectric strength is 500 VRMS for voltages 30 volts and under, and 1000 VRMS plus twice the rated voltage for over 30 volts.
Mechanical Specifications
The solenoid measures 1.700 inches in length and 1.500 inches in diameter. The plunger diameter is 0.625 inches, made of brass, and the mounting is done with a 1.250-inch hex nut. The plunger weighs 2.6 oz, and the total weight is 11.1 oz. It has a life expectancy of 250,000 cycles, depending on load conditions.
Agency Approvals
The solenoid has UL approvals under File No. E57982 for continuous duty and File No. E74443 for insulation systems.
Features
The solenoid features high-performance construction, is suitable for DC applications only, and is available in standard push and pull versions. Many models have UL approval.
Force Curves
The standard intermittent duty cycle is one minute "ON" and three minutes "OFF", while the standard pulse duty cycle is 100 milliseconds "ON" and 900 milliseconds "OFF". Cold force is measured at 25°C (77°F) and hot force at 130°C (266°F). An approximate 36 sq. in. heat sink is required.
Standard Part Numbers
The document lists various part numbers with specifications for voltage, duty cycle, power, resistance, operation type, and typical force at different strokes. For example, part number 53797-80 operates at 6 VDC with continuous duty, 12 Watts power, and provides a pull force of 173 oz at 0.000” stroke.
See more

All Deltrol Controls catalogs and technical brochures

  1. DSVP40-S

    4  Pages

  2. DSVP10

    5  Pages

  3. Solenoids

    6  Pages

  4. Hose Sets

    3  Pages

  5. Relays

    6  Pages

  6. MED 20x2_0

    3  Pages

  7. DSVP16N

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.