Catalogs >
Deltrol Controls >
MED 19x2.700 Tubular Frame Solenoid

MED 19x2.700 Tubular Frame Solenoid
1 / 4Pages

Catalog excerpts

MED 19x2.700 Deltrol ^ CONTROL! TUBULAR FRAME SOLENOID Two position linear solenoid with tubular frame construction. Features High performance construction Օ DC solenoids applications only Standard pull versions available Օ UL approval on many models Electrical Specifications Coil Voltages 6, 12, 24, 115 VDC Coil Power 12 Watts Continuous, 30 Watts Intermittent, 116 Watts Pulse Coil Termination Wire leads 20 AWG (standard) Duty Cycle Continuous, intermittent, pulse (see standard part numbers on page 4) Coil Treatment Tape Wrapped Insulation Class Class F Rating - 155°C (311°F) Max. Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Specifications Size 2.700" (L) x 01.187" (D) Forces See force curves on page 3 Plunger Diameter 0.4375" Plunger Guide Material Plastic Mounting .88" x .16" Hex Nut Weight Plunger - 2.1 oz., Total - 10.4 oz. Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approvals UL File No. E74443 For Insulation Systems S155 All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | sales@deltrol.com

Open the catalog to page 1

MED 19x2.700 & Deltrol CONTROLS Dimensional View Units: Inches [mm] 2X 6.000 [152.40] MIN. 2.700 [68.58] MAX. ,750 ±030 [19.05±76] 0.4375± 0020 [11.11 ±.05] PLUNGER LOCK WASHER HEX NUT .88 ACROSS FLATS X .16 THK 01.187 [30.15] UNLESS OTHERWISE SPECIFIED INCHES ± .015 (MILLIMETERS 0.38) 3/4-16 UNF-2A PLUNGER STOP AND BUFFER .375 [9.53] Specifications subject to change without notice 2 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | sales@deltrol.com

Open the catalog to page 2

MED 19x2.700 Force Curves Deltrol CONTR DC Continuous Duty - 12 Watts 0.00 0.20 0.40 0.60 0 80 Stroke(ln.) 1.00 1 30 1.40 DC Intermittent Duty - 30 Watts 140 120 100 80 60 43 20 \ \~ / =-|Force Coia iuift» voltage OGap 133 Q \ / r . I Perce p Gap Hot100% Voltage 123 01. X X 0.00 0.20 0.40 0.00 0.80 Strokelln.) 1.00 1 20 1.40 '■60 140 120 100 80 60 40 20 DC Pulse Duty - 116 Watts 1 1 Force Cold 100% Voltage 0 Gap 166 Oz Force Hot 100% Voltage 0 Gap 148 Oi 0 0.00 0.20 0.40 0.60 0.80 Siroke[ln,) 1.00 1 20 1.40 Standard intermittent duty cycle at nominal voltage is one (1) minute "ON" and three...

Open the catalog to page 3

MED 19x2.700 Deltrol CONTR Standard Part Numbers Parts No. Voltage 53792-80 6 VDC 53792-81 12 VDC 53792-82 24 VDC 53792-84 115 VDC 53792-86 6 VDC 53792-87 12 VDC 53792-88 24 VDC 53792-90 115 VDC 53792-92 6 VDC 53792-93 12 VDC 53792-94 24 VDC 53792-96 115VDC Duty Cycle Power Resistance (Ohms) Operation Typical Force (oz). 100% Voltage, 77°, Stroke @ 0.000" 0.125" 0.250" 0.500" 0.750" Continuous 12 Watts 3 12 48 1102 Pull 116 40 25 16 14 Intermittent 30 Watts 1.2 4.8 19.2 441 Pull 133 58 35 25 22 Pulse 116 Watts 0.31 1.24 4.97 114 Pull 165 100 75 56 52 (*) Normally Stocked Non stocked items...

Open the catalog to page 4

MED 19x2.700 Tubular Frame Solenoid 1 / 4Pages

Catalog excerpts

All Deltrol Controls catalogs and technical brochures

MED 19x2.700 Tubular Frame Solenoid
1 / 4Pages