*mydirectindustry

Catalogs
Deltrol Controls
MED 16x2.000 Tubular Frame Solenoid

MED 16x2.000 Tubular Frame Solenoid

Product catalog summary

Electrical Specifications
The solenoid operates at coil voltages of 6, 12, 24, and 115 VDC with power ratings of 10 Watts for continuous duty, 24 Watts for intermittent duty, and 96 Watts for pulse duty. The coil is terminated with 24 AWG wire leads and is tape wrapped for insulation, rated at Class A (105ºC max). Dielectric strength is 500 VRMS for voltages 30 and under, and 1000 VRMS plus twice the rated voltage for over 30 volts.

Mechanical Specifications
The solenoid measures 2.000 inches in length and 1.000 inch in diameter, with a plunger diameter of 0.4375 inches. It is mounted using a 0.875-inch hex nut and weighs 6.5 oz in total. The life expectancy is 250,000 cycles, depending on load conditions.

Agency Approvals
The solenoid has UL approvals for continuous duty (File No. E57982) and insulation systems (File No. E74443).

Features
The solenoid is designed for high performance in DC applications, available in standard push and pull versions, with UL approval on many models.

Force Curves
The document provides force curves for different duty cycles, with standard intermittent duty at one minute "ON" and three minutes "OFF", and pulse duty at 100 milliseconds "ON" and 900 milliseconds "OFF".

Standard Part Numbers
A table lists part numbers with specifications including voltage, duty cycle, power, resistance, operation type, and typical force at various strokes. Notably, some items are normally stocked, while non-stocked items require a minimum order.

Catalog excerpts

MED 16x2.000 Deltrol ^ CONTR TUBULAR FRAME SOLENOID Two position linear solenoid with tubular construction. Features High performance construction Օ DC solenoids applications only Standard push and pull versions available Օ UL approval on many models Electrical Specifications Coil Voltages 6, 12, 24, 115 VDC Coil Power 10 Watts Continuous, 24 Watts Intermittent, 96 Watts Pulse Coil Termination Wire leads 24 AWG (standard) Duty Cycle Continuous, intermittent and pulse (see standard part numbers on page 4) Coil Treatment Tape wrapped Insulation Class Class A Rating - 105°C (221°F) Max. Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Specifications Size 2.000" (L) x 01.000" (D) Forces See force curves on page 3 Plunger Diameter 0.4375" Plunger Guide Material Plastic Mounting 0.875" Hex Nut Weight Plunger - 1.53 oz., Total - 6.5 oz. Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approvals UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105 All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | [email protected]

Open the catalog to page 1

MED 16x2.000 & Deltrol CONTROLS Dimensional View Units: Inches [mm] PULL 2.000 [50.80] AND BUFFER _ UNLESS OTHERWISE SPECIFIED INCHES ± .015 ____ (MILLIMETERS 0.38) PLUNGER STOP PUSH 0.4375± 0020 [11.11 ±-05] Specifications subject to change without notice 2 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | [email protected]

Open the catalog to page 2

MED 16x2.000 Force Curves Deltrol CONTR DC Continuous Duty - 10 Watts 120 100 -f 30 o 40 20 0 Force uoia uu'b voilage 0GBp> 129.4 Oz ! | Force Hot 100% Voilage 0Gsp116.4 Oz. 000 0.10 0.20 0.30 0.40 0.50 060 0.7O 080 Slroke(ln-) DC Intermittent Duty - 24 Watts 120 100 Force CokJ 100% Voltage 0 Gap 149.7 Oz. 1 1 1 Force Hot 100% Voltage 0Gap1391Oz. 3 83 o 60 u. 40 20 D 0.00 0.10 0.20 0.30 0.40 0 50 0.60 0 70 0.80 Stroke(ln.) DC Pulse Duty - 96 Watts 0.80 030 040 050 Stroke (In.) Standard intermittent duty cycle at nominal voltage is one (1) minute "ON" and three (3) minutes "OFF". Standard pulse...

Open the catalog to page 3

MED 16x2.000 & Deltrol CONTROLS Standard Part Numbers Parts No. Voltage Duty Cycle Power Resistance (Ohms) Operation Typical Force (oz). 100% Voltage, 77°, Stroke @ 0.000" 0.125" 0.250" 0.500" 0.750" 53753-80 6 VDC Continuous 10 Watts 3.8 Pull 129 42 18 8 5 53757-80 6 VDC 3.8 Push 53753-81* 12 VDC 15 Pull 53757-81* 12 VDC 15 Push 53753-82* 24 VDC 60 Pull 53757-82* 24 VDC 60 Push 53753-84 115VDC 1500 Pull 53757-84 115VDC 1500 Push 53753-86 6 VDC Intermittent 24 Watts 1.5 Pull 149 72 36 15 8 53757-86 6 VDC 1.5 Push 53753-87* 12 VDC 6 Pull 53757-87* 12 VDC 6 Push 53753-88* 24 VDC 24 Pull 53757-88*...

Open the catalog to page 4

MED 16x2.000 Tubular Frame Solenoid

MED 16x2.000 Tubular Frame Solenoid

Catalog excerpts

All Deltrol Controls catalogs and technical brochures