24 105MLSERIES MAGNETIC LATCHING RELAY 5 & 10 AMP PLUG-IN OCTAL BASE DIVISION OF DELTROL CORP. 105 ML FEATURES n Snap-action, One Piece Armature Eliminates Interconnections n Molded Class F Coils Handle High Ambient Temperatures, Resist Moisture and Dust n High Impact Polycarbonate Dust Cover CONTACT DATA Configuration: Thru 5PDT Materials: 5 AMP: 1/8" Diameter Moveable Fine Silver 3/16" Diameter Stationary Fine Silver 10 AMP: 3/16" Diameter Moveable Silver Cadmium Oxide 3/16" Diameter Stationary Fine Silver Gold Flash is Standard on All Contacts Gold Diffused Available on Special Order – Min. Qty. Req’d. CONTACT RATINGS MOVEABLE POLE CONTACT SIZE CONFIGURATION RATINGS SPDT 5 amp or 1/8 HP at DPDT 120VAC 1/8" Diameter 3PDT 5 amp or 1/4 HP at 4PDT 240VAC 5PDT 5 amp at 28VDC SPDT 10 amp or 1/3 HP at DPDT 120VAC 3/16" Diameter 3PDT 10 amp or 1/2 HP at 4PDT 240VAC 5PDT 10 amp at 28VDC EXPECTED LIFE Electrical At Rated Load (Minimum) 100,000 Cycles Mechanical Life 10,000,000 Cycles DIELECTRIC STRENGTH 800 VRMS, 60 Hz Between Contacts 1500 VRMS, 60 Hz Between Other Elements MODEL 105ML: General Purpose Relay Terminates to Standard Pin Type Octal Receptacles, Deltrol Type 105 Sockets for SPDT and DPDT, Conxall Type 77-20 Sockets for 3PDT, 4PDT and 5PDT COIL DATA NOMINAL RESISTANCE NOMINAL VOLTAGE IN OHMS COIL ± 10% POWER 6VAC 4.5 12VAC 18 AC Coils 24VAC 72 3.5VA 120VAC 1850 240VAC 7200 6VDC 20 DC Coils 12VDC 80 24VDC 315 2W 110VDC 6800 Coil Voltages: AC: Up to 277 Volts/60 Hz DC: Up to 125 Volts Coil Treatment: Molded Rynite® Std. Class F Insulation Resistance: 100 Megohms Minimum UL Insulation System File No.: E74443 S155D 155°C Total Temperature Std. (Covers S105 Class A and S130D Class B Requirements) OPERATE DATA Pick Up (at 25°C): AC Volts 85% or Less of Nominal DC Volts 75% or Less of Nominal Operate Time: Approx. 20 Milliseconds Release Time: Approx. 20 Milliseconds ENVIRONMENTAL DATA Operating Ambient: AC: -45° to 70°C DC: -45° to 85°C Coil Temperature Rise: (25°C Ambient – Continuous Duty) AC: 45°C Approx. @ 60 Hz – Use at 50 Hz will Cause Slight Increase in Coil Rise DC: 45°C Approx. MECHANICAL DATA Terminals: Octal Type with 8, 11, 20 pins Cover: Polycarbonate – Flammability Rating 94V2 Weight: Approx. 8.6 oz. (244 g)