22 SERIES GENERAL PURPOSE MAGNETIC LATCHING RELAYS DIVISION OF DELTROL CORP. FEATURES n Inexpensive, General Purpose Latching Relays n Pole Configuration Up to 6PDT n Molded Class F Coils Handle High Ambient Temperatures, Resist Moisture and Dust n Snap Action, One Piece Armature Eliminates Interconnections n No Power Required to Maintain Contact Status - Only a Pulse to Change CONTACT DATA CONFIGURATION: Thru 6PDT MATERIALS: 5 AMP: 1/8" Diameter Moveable Fine Silver 3/16" Diameter Stationary Fine Silver 10 AMP: 3/16" Diameter Moveable Silver Cadmium Oxide 3/16" Diameter Stationary Fine Silver Gold Flash is Standard on All Contacts Gold Diffused Available on Special Order - Min. Qty. Req'd. CONTACT RATINGS MOVEABLE POLE UL CONTACT SIZE CONFIGURATION RATINGS** SPDT 5 amp or 1/8 HP DPDT at 120 VAC 1/8" Diameter 3PDT 5 amp or 1/4 HP 4PDT at 277VAC 5PDT 5 amp at 28VDC 6PDT SPDT DPDT 10 amp or 1/3 HP at 120 VAC* 3/16" Diameter 34PPDDTT 10 amp or 1/2 HP 5PDT at 277VAC 6PDT 10 amp at 28VDC * 3 Pole and 6 Pole Rated at 6-2/3 Amp When Switching Greater Than 150VAC Unless Polarity is the Same on All Poles ** UL and CSA on Model 100ML and 101ML Only UL RECOGNIZED FILE NO.: E37066 CSA CERTIFIED FILE NO.: LR20690 EXPECTED LIFE Electrical At Rated Load (Minimum) 100,000 Operations Mechanical Life 10,000,000 Operations DIELECTRIC STRENGTH 800 VRMS, 60 Hz Between Contacts 2200 VRMS, 60 Hz Between Other Elements MODELS 100ML: 5 Amp Latching Relay 101ML: 10 Amp Latching Relay 102ML: 5 & 10 Amp Latching Relay. No UL or CSA Recognition 103ML: 5 & 10 Amp Latching Relay Polarized for Applications Requiring Rejection of Wrong Signals Responds to External Change in Operating Polarity. No UL Or CSA Recognition COIL DATA NOMINAL RESISTANCE NOMINAL VOLTAGE IN OHMS COIL ± 10% POWER 6VAC 4.5 12VAC 18 AC Coils 24VAC 72 3.5VA 120VAC 1850 240VAC 7200 6VDC 20 12VDC 80 DC Coils 24VDC 315 2W 110VDC 6800 Coil Voltages: AC: Up to 277 Volts/60 Hz DC: Up to 125 Volts Coil Treatment: Molded Rynite® Std. Class F Insulation Resistance: 100 Megohms Minimum UL Insulation System File No.: E74443 S155D 155°C Total Temperature Std. (Covers S105 Class A and S130D Class B Requirements) OPERATE DATA Pick Up (at 25°C): AC Volts 85% or Less of Nominal DC Volts 75% or Less of Nominal Operate Time: Approx. 20 Milliseconds Release Time: Approx. 20 Milliseconds ENVIRONMENTAL DATA Operating Ambient: AC: -45° to 85°C DC: -45° to 100°C Coil Temperature Rise: (25°C Ambient – Continuous Duty) AC: 45°C Approx. @ 60 Hz – Use at 50 Hz will Cause Slight Increase in Coil Rise DC: 45°C Approx. MECHANICAL DATA Terminals: All Versions Pierced Solder Lugs Weight: Approx. 5 oz. (142 g) 100ML 100ML